Entourage Mining Proves Subsurface Extension to Uranium Mineralization at Doran Including Up to 2.9 Lb Per Ton U3O8 In One Intersection and 15 Meters / 49.2 Ft. of 0.4 Lb Per Ton U3O8 in Another


VANCOUVER, British Columbia, July 20, 2006 (PRIMEZONE) -- Entourage Mining Ltd. (the "Company or "Entourage") (OTCBB:ETGMF) is pleased to announce the results of the first phase drilling program on the M Zone of the Doran property located in the eastern part of Quebec, along the north shore of the Gulf of St. Lawrence, approximately 85 kilometers east of Havre St. Pierre and about 25 kilometers west of Aguanish. The drill hole results of the first phase confirm a uranium mineralization zone from 60 down to 65 meters along the holes, resulting in grade values higher than 0.5 Lb/ton in seven drill holes and one 15 meter intersection grading 0.40 Lb/t U3O8.

Sixteen drill holes with a total length of 1200 meters were drilled in the first phase in an area where historical estimates from previous work were done in 1977-1978. This work was done based on surface sampling only, suggesting a possible 10.8 million tons of material grading 0.5 lb/ton U3O8. The previous exploration results were not NI 43-101 compliant (and predated NI 43-101). The historic information provided is for reference only and the reader should not infer or assert that the information is correct, reliable, relevant or accurate and should not be relied upon.

To date Entourage Mining has received results of 16 holes, 14 of which proved subsurface uranium mineralization.

A summary table of the initial 14 drill holes follows:


                        Summary of the Initial 2006
                            Drill Hole Results
                               DORAN M ZONE

 Hole No.   From  To (m)   Intercept (m)  U ppm  U3O8 ppm  U3O8 Lb/Ton
 ---------------------------------------------------------------------
 H1-4       14.7 - 16.00      1.38        184.3   217.28     0.434
 ---------------------------------------------------------------------
 H1-12     61.00 - 62.00       1          114.3   134.75     0.269
 ---------------------------------------------------------------------
 H1-13     62.00 - 63.00       1          147.7   174.13     0.348
 ---------------------------------------------------------------------
 H2-27     62.00 - 66.9       4.9         101.3   119.4      0.238
 ---------------------------------------------------------------------
 H2-29      99.7 - 101.7       2          365.1   430.45     0.861
 ---------------------------------------------------------------------
 H3-30      10.9 - 18.2       7.3         134.7   158.81     0.317
 ---------------------------------------------------------------------
 H4-38      6.00 - 11.00       5          122.1   143.96     0.287
 ---------------------------------------------------------------------
 H4-39     11.00 - 16.1       5.1         104.4   123.08     0.246
 ---------------------------------------------------------------------
 H4-47      50.0 - 54.8       4.8         255.5   301.23     0.602
 ---------------------------------------------------------------------
 H4-48      54.8 - 60.00      5.2         105.3   124.15     0.248
 ---------------------------------------------------------------------
 H4-49     60.00 - 65.00       5          146.8   173.08     0.346
 ---------------------------------------------------------------------
 H4-502    53.25 - 54.0       0.75        465.8   549.17     1.098
 ---------------------------------------------------------------------
 H5-54      8.78 - 14         5.22        200.5   236.39     0.472
 ---------------------------------------------------------------------
 H5-55        14 - 20.36      6.36        121.1   142.78     0.285
 ---------------------------------------------------------------------
 H5-63     64.08 - 66.6       2.52        361.8   426.56     0.853
 ---------------------------------------------------------------------
 H6-67      7.54 - 15.13      7.59        111.8   131.81     0.263
 ---------------------------------------------------------------------
 H6-70        30 - 33          3          149.8   176.61     0.353
 ---------------------------------------------------------------------
 H6-73      40.5 - 41.85      1.35        186     219.29     0.438
 ---------------------------------------------------------------------
 H6-501    41.26 - 41.5       0.29        461.7   544.34     1.088
 ---------------------------------------------------------------------
 H7-78        15 - 19.18      4.18        134.7   158.81     0.317
 ---------------------------------------------------------------------
 H9-94        15 - 17.47      2.47        176     207.50     0.415
 ---------------------------------------------------------------------
 H11-98     8.37 - 9.76       1.39        272.2   320.92     0.642
 ---------------------------------------------------------------------
 H11-99     9.76 - 12.55      2.79        111.5   131.45     0.262
 ---------------------------------------------------------------------
 H12-101    14.5 - 15.2       0.7         537.9   634.18     1.268
 ---------------------------------------------------------------------
 H13-102      10 - 11.39      1.39       1216.9  1434.7      2.873
 ---------------------------------------------------------------------
 H14-104     1.6 - 6          4.4         166.4   196.18     0.392
 ---------------------------------------------------------------------
 H14-504       0 - 1.4       Casing       620.6   731.6      1.463(a)
 ---------------------------------------------------------------------
 H15-108    1.32 - 6.35       5.03        177.1   208.80     0.417
 ---------------------------------------------------------------------
 H15-111    16.4 - 20.5       4.1         212.1   250.06     0.500
 ---------------------------------------------------------------------
 H16-112    2.13 - 9.45       7.32        189.8   223.77     0.447
 ---------------------------------------------------------------------
 H16-113    9.45 - 12.0       2.55        110.7   130.51     0.261
 ---------------------------------------------------------------------
 H16-116   24.82 - 25.5       0.72        147.9   174.37     0.348
 ---------------------------------------------------------------------

Continuous Intersection(s)

Drill Hole H4-47, H4-48 and H4-49 comprise one 15meter intersection (49.2 feet) of 0.40 Lb/t U3O8 including .75 meters of 1.098 Lb/t U3O8.

Intersections higher than 0.5Lb/t are indicated below:



 Drill Hole H4-502 included an intersection of 549.17 ppm U3O8 (1.098
  Lb/t) over .75 meters.
 Drll Hole H4-47 included an intersection of 301.23 ppm U3O8 (0.602
  Lb/t) over 4.8 meters.
 Drill Hole H13-102 included an intersection of 1434.7 ppm U3O8 (2.870
  Lb/t) over 1.39 meters.
 Drill Hole H2-29 included an intersection of 430.45 ppm U3O8 (0.861
  Lb/t) over 2 meters.
 Drill Hole H5-63 included an intersection of 426.56 ppm U3O8 (0.853
  Lb/t) over 2.52 meters.
 Drill Hole H6-501 included an intersection of 544.34 ppm U3O8 (1.088
  Lb/t) over 0.29 meters.
 Drill Hole H11-98 included an intersection of 320.92 ppm U3O8 (0.642
  Lb/t) over 1.39 meters.
 Drill Hole H14-504 included an intersection of 731.6 ppm U3O8 (1.463
  Lb/t) over 1.4 meters casing (a).

 ((a) Drill Hole H 14-504 contained three broken pieces with two
 pieces approximately 20-25 centimeters in length grading 1.463 Lb/ton
 U3O8.)

A geological block model and cross sections is under construction that incorporates all assay results.

All drill cores are split at the project site and samples for assays are forwarded in secured containers to ACME Laboratories in Vancouver for sample preparation and uranium analysis.

"We are pleased with the initial drill results of the first phase" said Greg Kennedy, CEO of Entourage Mining Ltd. "All holes confirmed subsurface uranium mineralization."

The Company is planning for a second phase program to test three drill target areas recently delineated in the northeastern part of the property. During the 2006 program the Company's geological exploration team registered spectrometer readings that are much higher than the readings taken in the M Zone .

The comprehensive program of prospecting, radiometric surveys and rock saw channel sampling over the northern part of the property has identified 6 additional target areas characterized by potentially higher spectrometer readings and are more promising than the M Zone. The Company is planning to test three target areas by diamond drilling between mid to late August 2006.

This news release was prepared with the assistance of Entourage's geologist for the Doran Project, Michel Proulx, P.Geo, M.Sc.,OGQ., a 'Qualified Person' as that term is defined in National Instrument 43-101. Mr. Proulx was the project geologist who supervised the drilling program, the rock sampling, and the ground radiometric survey.

On behalf of the Board

Entourage Mining Ltd.

Gregory F Kennedy

President

Forward Looking Statements

Except for historical information contained herein, the statements in this Press Release may be forward-looking statements. Forward-looking statements involve known and unknown risks and uncertainties, which may cause Entourage Mining Ltd.'s actual results in future periods to differ materially from forecasted results. These risks and uncertainties include, among other things, volatility of commodity prices, product demand, market competition, and risks inherent in Entourage Mining Ltd.'s operations. These and other risks are described in the Company's Annual Report on Form 20-F and other filings with the Securities and Exchange Commission.



            

Tags


Contact Data