HIGH SILVER- AND GOLDVALUES WERE ENCOUNTERED IN DRILLING AT THE DEEP EXTENSION OF THE SILVERMINE DEPOSIT

Sotkamo Silver had conducted a diamond-drilling campaign at the Silver
Mine to further investigate about the ore-formation, explore the
depth-extension and to drill holes for new electricity-cables between
the mine-levels. All drilling was underground drilling. 13 holes and a
total of 2 502 meters were drilled. Drilling was carried out with NQ
equipment, which gives a 50,7 mm core in diameter.


The mine’s electricity-system were improved by installing two new cables
in separate holes between levels +84, +175, +255 and +330. This enabled
the construction of new power stations at each level.

Holes TU 6 and TU 7 were drilled to confirm continuity of the deposit.
The four holes TU11, TU 20, TU 18 and TU 76 were drilled to investigate
the lower part of the deposit and the continuity downwards.  One long
hole, TU 1 was drilled to investigate the reason of the geophysical
anomaly that extends south from the main deposit. Locations of holes are
given in attached picture-compilation. Table 1 shows the assay-values of
the best intersections in the drilled holes. See also picture 1.

Drill-hole TU 1 was drilled from the deepest part of the
production-tunnel to clarify reasons of the geophysical anomaly defined
by earlier Sampo-surveys. In the depth of 611-615 meter the semi-massive
sulfide-zone was intersected containing 9 % sulfur and 1.1 % zinc. In
the depth of 808 -810 meters there is a 2 meter intersection containing
152 g/t silver and 0.6 g/t gold. These observations are 200-300 meters
apart from earlier known ore-deposit model. This indicates a widespread
occurrence of ore-forming processes and high ore potential of the area.

Holes TU 6 and TU 7 were drilled to confirm the continuity of the
mineral resource. In both holes silver-grades above cut-off value of 50
g/t silver was found. Holes TU 11, TU 18, TU 20 and TU 76 were drilled
in the lower part of the known deposit and below it. Holes TU 11, TU 18
and TU 20 intersect the silver mineralisation, which exceed the
cut-off-value and confirm the continuity of the deposit and will
increase the mineral-resources.

Hole TU 76 is one of best holes drilled in this part of deposit, about
100 meters below earlier observations. The core contains a 17,5 meters
intersection with 266 g/t silver and 0,73 g/t gold. Inside this
intersection the best part contains 411 g/t silver and 1,2 g/t gold at a
length of 7,65 meters. The actual width of the intersected layer is
about 5 meters as the intersection is oblique.

Drilling results confirm the deep extension of the silver deposit and
that ore forming processes have been extensive.

”I am very pleased that we have been able to confirm that silver deposit
continues downwards. Especially increase of gold values are a good sign.
These results give remarkable new information of deposit structure and
ore potential of depth continuation. I am convinced that these actions
and continuous improvement are key to our success and future development
of Sotkamo Silver” says CEO Timo Lindborg.

(for graphic, see attached file)

Picture 1. Mineralized lenses containing more than 0,3 g/ton gold are
presented in the upper part of the picture. In lower part Sampo-anomaly,
interpreted from a geophysical survey, indicates conductive layers.
Drill hole TU 76 intersects the conductive layers about 100 meters below
earlier observations along with17.5 meters with 266 g/t silver and 0.73
g/t gold.

Sotkamo Silver AB discloses the information provided herein pursuant to
the Swedish Securities Markets Act and/or the Swedish Financial
Instruments Trading Act

The official Stock Exchange Releases are given in Swedish and there may
be slight differences in the translated versions.

(for tables, please see attached file)

Table 1: The best intersections in the drilled holes from core-drilling
campaign Autumn 2014.

 

Stockholm

Sotkamo Silver AB (publ)

Timo Lindborg, CEO

 

 

 About Sotkamo Silver AB:

Sotkamo Silver AB´s business concept is to exploit mineral deposits in
the Nordic countries with regards to human society and environment.
Sotkamo Silver owns, through its subsidiary mineral deposits, which
contains silver and gold in Finland. The Company’s main development
project is the Taivaljärvi Silver Mine.

Sotkamo Silver applies SveMin’s & FinnMin’s respective rules of
reporting for public mining & exploration companies. Sotkamo Silver
has chosen to report mineral resources and ore reserves according to the
internationally accepted JORC or NI 43-101-code. The company applies
International Financial Reporting Standards (IFRS) as approved by the
European Union.

The ticker symbol is SOSI in NGM and SOSI1 in NASDAQ OMX Helsinki. 
ISIN-code for Sotkamo Silver shares is SE0001057910..

Company\'s press releases and financial reports are distributed via NGM
and are available on www.silver.fi

Read more about Sotkamo Silver on www.sotkamosilver.com or www.silver.fi

For further information: Timo Lindborg, CEO, tel. +358 40 508 3 507