DGAP-News: Dialog Semiconductor Plc.: DIALOG SEMICONDUCTOR EXTENDS SSL PORTFOLIO WITH MR16 DIMMABLE LED DRIVERS OFFERING UNIVERSAL TRANSFORMER COMPATIBILITY


DGAP-News: Dialog Semiconductor Plc. / Key word(s): Product
Launch/Miscellaneous
Dialog Semiconductor Plc.: DIALOG SEMICONDUCTOR EXTENDS SSL PORTFOLIO
WITH MR16 DIMMABLE LED DRIVERS OFFERING UNIVERSAL TRANSFORMER
COMPATIBILITY

05.02.2015 / 08:00

---------------------------------------------------------------------

iW3662 uses Dialog's patent-pending digital control technology to optimise
compatibility with virtually any transformer (electronic or magnetic), to
loads as low as 4W

London UK, 05 February 2015 - Dialog Semiconductor plc (FWB:DLG), a
provider of highly integrated power management, AC/DC power conversion,
solid state lighting (SSL) and Bluetooth(R) Smart wireless technology,
today announced its entrance into the MR16 dimmable solid state lighting
(SSL) market with an innovative LED driver designed to solve transformer
and dimmer compatibility issues in challenging, low-voltage lighting
applications. The iW3662 uses Dialog's patent-pending digital control
technology to optimise low-voltage SSL bulbs for compatibility with
virtually any transformer (electronic or magnetic), even in lighting
applications with output power as low as 4W.

The greatest challenge in designing low-voltage MR16 LED retrofit bulbs is
the installed base of AC step-down electronic transformers, which are not a
good match for LED lighting. MR16 halogen lamps require transformers to
convert the standard electric line voltage down to 12VAC. Most low-voltage
halogen lighting systems use small, inexpensive electronic transformers to
perform this conversion. These transformers are designed to power resistive
loads and can typically require a minimum load of 20W. While this load is
easily provided by 50W halogen lamps, an equivalent LED MR16 lamp drawing
8W struggles to latch the transformer, with lower wattage bulb replacements
often completely failing.

The iW3662 LED driver solves this MR16 transformer compatibility problem
with patent-pending control technology that uses advanced digital analytics
to detect installed electronic transformers and dynamically increases the
peak loading to latch the transformer, even during low dimming ranges,
while maintaining the high efficiency expected from SSL LED bulbs. The
iW3662 includes detection for magnetic step-down transformers as well to
automatically switch in a compatible loading mechanism for these older
models.

The iW3662 dimmable MR16 SSL LED driver also uses digital technology to
provide exceptional dimmer compatibility (both TRIAC and digital dimmers)
and dimmer performance, with either electronic or magnetic transformers. It
delivers smooth flicker and shimmer-free dimming down to 5% of measured
light.

"Dialog is the definitive leader in digital control technology for SSL
lighting, with LED driver solutions for applications ranging from small
form-factor retrofit bulbs to commercial lighting ballasts," said Davin
Lee, Senior Vice President and General Manager of the Power Conversion
Business Group at Dialog Semiconductor. "The one remaining portion of the
market we had not addressed was the low-voltage, dimmable MR16 segment,
where our customers experience transformer and dimmer compatibility issues
with existing LED driver solutions. Our innovative iW3662 builds on our
digital control expertise with new intellectual property developed
specifically for the low-voltage SSL lighting market."

The iW3662 is seeing broad industry adoption with Sengled Lighting being
one of the first early adopters to offer a new generation of MR16 bulbs to
the market.

"As a global leader in high quality, energy-saving green lighting
solutions, Sengled is dedicated to bringing the most innovative SSL
products to the market," explains Johnson Shen, Founder and President at
Sengled Lighting. "The challenge with low-voltage, dimmable MR16 lighting
is compatibility with the existing infrastructure of transformers and
dimmers. Dialog's new iW3662 LED driver enabled us to easily, elegantly and
cost effectively solve these issues and enabled us to deliver the highest
quality dimmable MR16 LED bulbs that allow consumers to seamlessly replace
halogen bulbs today."

Designed for low-voltage AC and DC inputs, the iW3662 offers either
single-stage or two-stage operation. This simplifies design and reduces
development time by allowing designers to specify one part across multiple
low-voltage LED replacement bulb applications, as well as high-voltage
chip-on-board (COB) LED modules up to 8W.

The advanced control circuitry in the iW3662 helps designers reduce their
bill of materials (BOM) cost by enabling the use of low-cost, off-the-shelf
inductors, while the high-frequency 1MHz switching supports the use of
smaller, less-expensive external components.

The iW3662 integrates Dialog's patented over-temperature protection (OTP)
de-rating technology to address LED bulb lifetime issues caused by
excessive heat. OTP technology monitors the temperature inside the sealed
SSL bulb and seamlessly dims light output if the temperature rises above a
safe operating threshold, then restores brightness as temperature falls.
This results in cooler operation, avoids exceeding the temperature rating
of the electrolytic capacitors, and helps ensure a predictable and safer
bulb operating life.

iW3662 Key Features

  - Flexible single-stage or two-stage design

  - 4W to 8W output power

  - Optimised for compatibility with all transformers

  - Electronic and magnetic

  - Exceptional dimmer compatibility

  - TRIAC (leading and trailing-edge) and digital

  - Wide dimming range: 5% to 100%

  - Low total BOM size/cost

  - Uses low-cost, off-the-shelf inductor

  - High frequency operation for smaller external components

  - LED over-temperature protection derating

  - MR16 bulbs, AR111 fixtures, bulbs

Product summary is available: iW3662 Product Summary. 

‒ ENDS ‒

Company Contact:
Lauren Ofstedahl
Dialog Semiconductor
Phone: +1 (408) 845-8518
lauren.ofstedahl@diasemi.com
Web: www.dialog-semiconductor.com
Twitter: @DialogSemi

Sherry Hill
Dialog Semiconductor 
Power Conversion Business Group
Phone: +1 (408) 628-6521
sherry.hill@diasemi.com                       

About Dialog Semiconductor
Dialog Semiconductor provides highly integrated standard (ASSP) and custom
(ASIC) mixed-signal integrated circuits (ICs), optimised for Smartphone,
Tablet, IoT, Solid State Lighting (SSL) and Smart Home applications. Dialog
brings decades of experience to the rapid development of ICs while
providing flexible and dynamic support, world-class innovation and the
assurance of dealing with an established business partner. With world-class
manufacturing partners, Dialog operates a fabless business model and is a
socially responsible employer pursuing many programs to benefit the
employees, community, other stakeholders and the environment we operate in.

Dialog's power saving technologies including DC-DC configurable system
power management deliver high efficiency and enhance the consumer's user
experience by extending battery lifetime and enabling faster charging of
their portable devices. Its technology portfolio also includes audio,
Bluetooth(R) Smart, Rapid Charge(TM) AC/DC power conversion and
multi-touch.

Dialog Semiconductor plc is headquartered in London with a global sales,
R&D and marketing organisation. In 2014, it had approximately $1.16 billion
in revenue and was one of the fastest growing European public semiconductor
companies. It currently has approximately 1,400 employees worldwide. The
company is listed on the Frankfurt (FWB: DLG) stock exchange (Regulated
Market, Prime Standard, ISIN GB0059822006) and is a member of the German
TecDax index. It also has convertible bonds listed on the Euro MTF Market
on the Luxemburg Stock Exchange (ISIN XS0757015606).



---------------------------------------------------------------------

05.02.2015 Dissemination of a Corporate News, transmitted by DGAP - a
service of EQS Group AG.
The issuer is solely responsible for the content of this announcement.

The DGAP Distribution Services include Regulatory Announcements,
Financial/Corporate News and Press Releases.
Media archive at www.dgap-medientreff.de and www.dgap.de

---------------------------------------------------------------------


Language:    English                                               
Company:     Dialog Semiconductor Plc.                             
             Tower Bridge House, St. Katharine's Way               
             E1W 1AA London                                        
             United Kingdom                                        
Phone:       +49 7021 805-412                                      
Fax:         +49 7021 805-200                                      
E-mail:      jose.cano@diasemi.com                                 
Internet:    www.diasemi.com                                       
ISIN:        GB0059822006, XS0757015606                            
WKN:         927200                                                
Indices:     TecDAX                                                
Listed:      Regulierter Markt in Frankfurt (Prime Standard);      
             Freiverkehr in Berlin, Düsseldorf, Hamburg, München,  
             Stuttgart                                             
 
 
End of News    DGAP News-Service  
---------------------------------------------------------------------  
319777 05.02.2015