3D Systems Reports Second Quarter and Six Months 2015 Financial Results


ROCK HILL, S.C., Aug. 6, 2015 (GLOBE NEWSWIRE) -- 3D Systems Corporation (NYSE:DDD) announced today its financial results for the second quarter and first six months of 2015.

For the second quarter of 2015, the company reported revenue of $170.5 million, an increase of 13% over the comparable quarter in 2014, or a 22% increase on a constant currency basis. The company reported a GAAP loss of $0.12 per share and non-GAAP earnings of $0.03 per share.

A challenging operating environment contributed to an overall decline in organic revenue of 5% compared with the second quarter of 2014. At constant currency rates, organic growth was 2% for the second quarter.

Strengthening demand for the company's products and services resulted in a 25% increase in revenue in EMEA, compared to the second quarter of 2014. Continued macroeconomic weaknesses in APAC compressed revenue by 9%. Moderate recovery in the Americas held revenue growth to 15%.

Overall, the company experienced sequential growth in its SLA, SLS and DMP 3D printers as industrial customers, including aerospace and healthcare, began to resume purchasing. MJP and CJP 3D printer units leveled off sequentially after several periods of progressive decline.

Gross profit margin remained flat at 47.9% compared to the second quarter of 2014. While gross profit margins from materials and services increased, an inventory write-off and higher than normal manufacturing variances attributable to consolidation of production facilities restricted total gross profit margin expansion.

For the second quarter of 2015, the company reported operating expenses of $105.5 million, inclusive of $25.7 million of R&D expenditures, resulting in a sequential cash operating expenses increase of 11% primarily from the integration of acquisitions. The company used $6.4 million of cash in operations during the second quarter and had $171.2 million of cash on hand at the end of June.

For the second quarter of 2015, the company reported a GAAP net loss of $13.7 million, or a $0.12 loss per share, and non-GAAP net income of $3.1 million, or $0.03 earnings per share.

For the first six months of 2015, revenue grew 11% to $331.2 million, or a 19% increase on a constant currency basis, resulting in a GAAP loss of $0.24 per share and non-GAAP earnings of $0.07 per share.

"We are disappointed with our overall results," said Avi Reichental, President and Chief Executive Officer, 3DS. "While a period of high growth enabled us to acquire strategic assets and build critical expertise, our rapid expansion permitted certain operating inefficiencies that we are currently addressing. Specifically, we are enhancing the quality of our products and services, accelerating synergy and cost reduction measures, driving process improvements and working closely with our channel partners to improve our sales operations and worldwide coverage."

Recent Business Highlights

The company is focusing on leveraging its domain expertise in key verticals into new products and partnerships that it believes will drive incremental adoption, including:

  • Expanded its presence and coverage in China through the acquisition of Easyway
  • Broadened its partner network with the addition of Konica Minolta Australia, HK 3D in the United Kingdom, and MLC CAD Systems in the United States
  • Entered into additional agreements with the Air Force Research Laboratory, Honeywell and the U.S. Navy, expanding the company's relevance in aerospace and defense research and development activities
  • Expanded its CubePro™ 3D printer capabilities with Infinity™ rinse-away water soluble support material
  • Extended its education coverage by entering new distribution agreements with Douglas Stewart EDU and Thermo Fisher Scientific and strengthened its K-12 offering by integrating STEAMtrax's curricula into its education kits

"While industry conditions may constrain growth rates in the near term, we believe our focus on quality, innovation, operational excellence and partner friendliness will enhance our customer attractiveness and deliver greater earnings power as industry growth resumes," concluded Reichental.

Q2 Conference Call and Webcast

The company expects to release second quarter results and to file its Form 10-Q with the Securities and Exchange Commission on August 6, 2015. 3D Systems plans to hold a conference call and simultaneous webcast to discuss these results on Thursday, August 6, 2015, at 8:30 a.m. Eastern Time.

Date: Thursday, August 6, 2015

Time: 8:30 a.m. Eastern Time

Listen via Internet: www.3dsystems.com/investor

Participate via telephone:

Within the U.S.: 1-877-407-8291
Outside the U.S.: 1-201-689-8345

The recorded webcasts will be available beginning approximately two hours after each live presentation at www.3dsystems.com/investor.

Forward-Looking Statements

Certain statements made in this release that are not statements of historical or current facts are forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995. Forward-looking statements may involve known and unknown risks, uncertainties and other factors that may cause the actual results, performance or achievements of the company to be materially different from historical results or from any future results or projections expressed or implied by such forward-looking statements. In addition to statements that explicitly describe such risks and uncertainties, readers are urged to consider statements in the conditional or future tenses or that include terms such as "believes," "belief," "expects," "estimates," "intends," "anticipates" or "plans" to be uncertain and forward-looking. Forward-looking statements may include comments as to the company's beliefs and expectations as to future events and trends affecting its business and are necessarily subject to uncertainties, many of which are outside the control of the company, including but not limited to, statements about management's expectations regarding the company's performance, initiatives and strategies. The factors described under the headings "Forward-Looking Statements," "Cautionary Statements and Risk Factors," and "Risk Factors" in the company's periodic filings with the Securities and Exchange Commission, as well as other factors, could cause actual results to differ materially from those reflected or predicted in forward-looking statements. Readers are cautioned not to place undue reliance on these forward-looking statements, which speak only as of the date hereof. 3D Systems undertakes no obligation to update or revise any forward-looking statements, even if experience or future changes make it clear that projected results expressed or implied in such statements will not be realized, except as may be required by law.

Presentation of Information in This Press release

To facilitate a better understanding of the impact that several strategic acquisitions had on its financial results, the company reported non-GAAP measures that adjust net income and earnings per share by excluding the impact of amortization of intangibles, non-cash interest expense, acquisition and severance expenses, litigation settlements, loss on conversion of notes and stock-based compensation expense. A reconciliation of GAAP to non-GAAP results is provided in the accompanying schedule.

About 3D Systems

3D Systems provides the most advanced and comprehensive 3D digital design and fabrication solutions available today, including 3D printers, print materials and cloud-sourced custom parts. Its powerful ecosystem transforms entire industries by empowering professionals and consumers everywhere to bring their ideas to life using our vast material selection, including plastics, metals, ceramics and edibles. 3DS' leading personalized medicine capabilities save lives and include end-to-end simulation, training and planning, and printing of surgical instruments and devices for personalized surgery and patient specific medical and dental devices. Its democratized 3D digital design, fabrication and inspection products provide seamless interoperability and incorporate the latest immersive computing technologies. 3DS' products and services disrupt traditional methods, deliver improved results and empower our customers to manufacture the future now.

Leadership Through Innovation and Technology

  • 3DS invented 3D printing with its Stereolithography (SLA) printer and was the first to commercialize it in 1989.
  • 3DS invented Selective Laser Sintering (SLS) printing and was the first to commercialize it in 1992.
  • 3DS invented the ColorJet Printing (CJP) class of 3D printers and was the first to commercialize 3D powder-based systems in 1994.
  • 3DS invented MultiJet Printing (MJP) printers and was the first to commercialize it in 1996.
  • 3DS' Medical Modeling pioneered virtual surgical planning (VSP) and its services are world-leading, helping many thousands of patients on an annual basis.

Today its comprehensive range of 3D printers is the industry's benchmark for production-grade manufacturing in aerospace, automotive, patient specific medical device and a variety of consumer, electronic and fashion accessories.

More information on the company is available at www.3dsystems.com.

Tables Follow

3D Systems Corporation
Unaudited Condensed Consolidated Statements of Operations and
Comprehensive Income (Loss)
Quarter and Six Months Ended June 30, 2015 and 2014
 
  Quarter Ended June 30, Six Months Ended June 30,
(in thousands, except per share amounts) 2015 2014 2015 2014
Revenue:        
Products $ 104,577 $ 99,984 $ 204,399 $ 201,178
Services 65,927 51,528 126,827 98,092
Total revenue 170,504 151,512 331,226 299,270
Cost of sales:        
Products 57,484 51,232 107,960 98,048
Services 31,393 27,882 62,655 53,352
Total cost of sales 88,877 79,114 170,615 151,400
Gross profit 81,627 72,398 160,611 147,870
Operating expenses:        
Selling, general and administrative 79,738 50,322 154,030 99,042
Research and development 25,731 17,714 47,947 34,949
Total operating expenses 105,469 68,036 201,977 133,991
Income (loss) from operations (23,842) 4,362 (41,366) 13,879
Interest and other expense, net 89 1,476 2,656 2,524
Income (loss) before income taxes (23,931) 2,886 (44,022) 11,355
Provision (benefit) for income taxes (10,096) 694 (17,039) 4,253
Net income (loss) (13,835) 2,192 (26,983) 7,102
Less net income attributable to noncontrolling interests (139) 67 (106) 100
Net income (loss) attributable to 3D Systems Corporation $ (13,696) $ 2,125 $ (26,877) $ 7,002
Net income (loss) per share available to 3D Systems Corporation common stockholders — basic and diluted $ (0.12) $ 0.02 $ (0.24) $ 0.07
         
Other comprehensive income (loss):        
Pension adjustments, net of taxes $ (3) $ 26 $ 262 $ 45
Foreign currency translation loss 13,011 1,621 (7,946) 1,634
Other comprehensive income (loss) 13,008 1,647 (7,684) 1,679
Less foreign currency translation gain (loss) attributable to noncontrolling interests (1,581) (24) (1,706) 2
Other comprehensive loss attributable to 3D Systems Corporation 14,589 1,671 (5,978) 1,677
         
Comprehensive income (loss) (827) 3,839 (34,667) 8,781
Less comprehensive income (loss) attributable to noncontrolling interests (1,720) 43 (1,812) 102
Comprehensive income (loss) attributable to 3D Systems Corporation $ 893 $ 3,796 $ (32,855) $ 8,679
 
3D Systems Corporation
Unaudited Condensed Consolidated Balance Sheets
June 30, 2015 and December 31, 2014
 
  June 30, December 31,
(in thousands, except par value) 2015 2014
ASSETS    
Current assets:    
Cash and cash equivalents $ 171,217 $ 284,862
Accounts receivable, net of allowance for doubtful accounts of $15,559 (2015) and $10,300 (2014) 149,492 168,441
Inventories, net 130,735 96,645
Prepaid expenses and other current assets 29,237 15,769
Current deferred income tax asset 22,099 14,973
Total current assets 502,780 580,690
Property and equipment, net 86,984 81,881
Intangible assets, net 287,486 251,561
Goodwill 627,131 589,537
Long term deferred income tax asset 705 816
Other assets, net 20,867 21,485
Total assets $ 1,525,923 $ 1,525,970
LIABILITIES AND EQUITY    
Current liabilities:    
Current portion of debt and capitalized lease obligations $ 528 $ 684
Accounts payable 63,687 64,378
Accrued and other liabilities 45,364 44,219
Customer deposits 7,636 6,946
Deferred revenue 39,575 32,264
Total current liabilities 156,790 148,491
Long term portion of capitalized lease obligations 8,486 8,905
Long term deferred income tax liability 31,153 30,679
Other liabilities 33,503 34,898
Total liabilities 229,932 222,973
Redeemable noncontrolling interests 8,872 8,872
     
Stockholders' equity:    
Common stock, $0.001 par value, authorized 220,000 shares; issued 112,325 (2015) and 112,233 (2014) 112 112
Additional paid-in capital 1,266,862 1,245,462
Treasury stock, at cost: 342 shares (2015) and 709 shares (2014) (235) (374)
Accumulated earnings 45,247 72,124
Accumulated other comprehensive income (loss) (30,384) (24,406)
Total 3D Systems Corporation stockholders' equity 1,281,602 1,292,918
Noncontrolling interests 5,547 1,207
Total stockholders' equity 1,287,149 1,294,125
Total liabilities and stockholders' equity $ 1,525,953 $ 1,525,970
 
3D Systems Corporation
Unaudited Condensed Consolidated Statements of Cash Flows
Six Months Ended June 30, 2015 and 2014
 
  Six Months Ended June 30,
(in thousands) 2015 2014
Cash flows from operating activities:    
Net income (loss) $ (26,983) $ 7,102
Adjustments to reconcile net income (loss) to net cash provided (used) by operating activities:    
Benefit of deferred income taxes (14,773) (13,249)
Depreciation and amortization 41,895 24,390
Non-cash interest on convertible notes 193
Provision for bad debts 5,135 3,141
Provision for obsolete inventory 3,657 2,712
Stock-based compensation 20,050 15,638
Loss on the disposition of property and equipment 711 296
Changes in operating accounts:    
Accounts receivable 25,899 (7,013)
Inventories (37,774) (18,423)
Prepaid expenses and other current assets (13,332) (6,630)
Accounts payable (3,827) 12,983
Accrued and other liabilities (11,393) (3,029)
Customer deposits 678 1,818
Deferred revenue 2,411 1,544
Other operating assets and liabilities 1,293 (2,143)
Net cash provided by (used in) operating activities (6,353) 19,330
Cash flows from investing activities:    
Purchases of property and equipment (12,196) (8,965)
Additions to license and patent costs (560) (382)
Cash paid for acquisitions, net of cash assumed (91,799) (53,526)
Other investing activities (1,750) (300)
Net cash used in investing activities (106,305) (63,173)
Cash flows from financing activities:    
Tax benefits from share-based payment arrangements 547 6,368
Proceeds from exercise of stock options and restricted stock, net 299,749
Repayment of capital lease obligations 942 1,437
Net cash provided by financing activities (526) (88)
Effect of exchange rate changes on cash 963 307,466
Net increase (decrease) in cash and cash equivalents (1,950) 323
Cash and cash equivalents at the beginning of the period (113,645) 263,946
Cash and cash equivalents at the end of the period 284,862 306,316
  $ 171,217 $ 570,262
 
3D Systems Corporation
Schedule 1
Earnings (Loss) Per Share
Quarter and Six Months Ended June 30, 2015 and 2014
 
  Quarter Ended June 30, Six Months Ended June 30,
(in thousands, except per share amounts) 2015 2014 2015 2014
Numerator for basic and diluted net earnings per share:        
Net income (loss) attributable to 3D Systems Corporation $ (13,696) $ 2,125 $ (26,877) $ 7,002
         
Denominator for basic and diluted net earnings per share:        
Weighted average shares 112,017 106,407 111,875 104,985
         
Earnings (loss) per share, basic and diluted $ (0.12) $ 0.02 $ (0.24) $ 0.07
         
Interest expense excluded from diluted earnings per share calculation (a) $ — $ 206 $ — $ 362
5.50% Convertible notes shares excluded from diluted earnings per share calculation (a) 876 876
Restricted stock units(b) 40 37
         
(a) Average outstanding diluted earnings (loss) per share calculation excludes shares that may be issued upon conversion of the outstanding senior convertible notes since the effect of their inclusion would have been anti-dilutive.
(b) Average outstanding diluted earnings (loss) per share calculation excludes restricted stock units since the effect of their inclusion would have been anti-dilutive.
 
3D Systems Corporation
Schedule 2
Unaudited Reconciliation of GAAP Net Income to Non-GAAP Net Income
Quarter and Six Months Ended June 30, 2015 and 2014
 
  Quarter Ended June 30, Six Months Ended June 30,
(in thousands, except per share amounts) 2015 2014 2015 2014
GAAP net income (loss) attributable to 3D Systems Corporation $ (13,696) $ 2,125 $ (26,877) $ 7,002
Cost of sales adjustments:        
Amortization of intangibles 76 70 151 135
Operating expense adjustments:        
Amortization of intangibles 17,405 8,141 31,846 17,269
Acquisition and severance expenses 1,936 2,405 5,176 3,395
Non-cash stock-based compensation expense 9,721 8,363 20,050 15,639
Interest and other expense adjustments:        
Non-cash interest expense 98 194
Tax effect (a) (12,293) (4,579) (21,998) (11,952)
Non-GAAP net income $ 3,149 $ 16,623 $ 8,348 $ 31,682
         
Non-GAAP basic and diluted earnings per share $ 0.03 $ 0.16 $ 0.07 $ 0.30
(a) tax effect is based on each quarters reported tax rate


            

Contact Data