Acrow Bridge Provides Temporary Structures for Bridge Replacement Project in Québec

Bridges will allow uninterrupted passage during construction in the Îles Laval

BOLTON, Ontario, April 30, 2018 (GLOBE NEWSWIRE) -- Acrow Bridge, a leading international bridge engineering and supply company has provided two temporary modular panel bridges being used during the replacement of two structures in the Îles Laval district in Québec. The first bridge connects the city of Laval with Île Bigras, and the second links Île Bigras with nearby Île Verte. It is critical that continued passage be maintained between these two points during construction as each carries daily commuters to Montréal from the rail station on Île Bigras.

The temporary two-lane bridge from Acrow linking Laval to Île Bigras consists of three spans totaling 106.7 meters (350 feet) in length with a width of 6 meters (20 feet). The single-lane structure from Île Bigras to Île Verte contains two spans for an overall length of 76.2 meters (250 feet) and a width of 4.3 meters (14 feet). Both bridges have additional pedestrian walkways 1.5 meters (4.9 feet) wide. 

The construction zones for each bridge offered very limited space, particularly in the case of the bridge to Île Verte. Due to the challenges of the site, it was necessary to launch the bridge from Île Verte, misaligned with the pier, and later rotate the structure into place with a crane.

The first of the rented Acrow components arrived on site in early October 2017. The temporary bridge from Laval to Île Bigras was completed in late November and is expected to be in place for approximately 18 months until the completion of the permanent bridge. The temporary Île Verte structure was completed December18 and will be used during the duration of the project, expected to be 12 months.

“Acrow’s temporary structures were the perfect solution for this project,” said Benoit Forget, Acrow’s regional director for Québec/New Brunswick. “While this was a technically difficult job owing to the tight work zones, it was ultimately very rewarding to be a part of this bridge replacement project.”

The project contractor is Eurovia Québec, and the abutments and piers for the temporary bridges were made by design engineer LDA Services Conseils. The assembly and installation of the bridges was executed by ETPO-GÉODEX.

About Acrow Bridge
Acrow Bridge has been serving the transportation and construction industries for more than 60 years with a full line of modular steel bridging solutions for vehicle, rail, military and pedestrian use. Acrow’s extensive international presence includes its leadership in the development and implementation of bridge infrastructure projects in over 80 countries, covering Africa, Asia, the Americas, Europe and the Middle East. For more information, please visit


Tracy Van Buskirk
Marketcom PR
Main: (212) 537-5177, ext. 8
Mobile: (203) 246-6165