Mirasol Resources Reports on Drill Program at Sascha Marcelina Project in Argentina

Encouraging Au/Ag and Base Metal Mineralization Identified

Vancouver, British Columbia, CANADA


VANCOUVER, British Columbia, Aug. 09, 2021 (GLOBE NEWSWIRE) -- Mirasol Resources Ltd. (TSX-V: MRZ) (OTCPK: MRZLF) (the “Company” or “Mirasol”) is pleased to report the results from the recently completed 2,814m drill program at the Sascha Marcelina Project (“Sascha Marcelina”) in Santa Cruz province, Argentina.

Mirasol’s President, Tim Heenan, commented: “We are encouraged with the early results from this maiden drill program on three of our priority prospects within the Sascha Marcelina project. The Pellegrini Trend returned a broad zone of Au and Ag mineralization overprinting a younger Pb and Zn rich base metal pulse, that is interpreted to represent the high-level expression in this epithermal system. This mineralized zone may correspond to the top or the margins of a hydrothermal breccia body, or possibly the upper zones of a larger mineralized and dilated structure at depth, spatially associated with a rhyolitic dome complex. Drilling on the Igloo and Estancia Trends also returned a number of anomalous Au and Ag intercepts, and improved our understanding of the local geological settings which will help in vectoring follow-up drill programs towards higher grade zones at depth and within a more permissive stratigraphic horizon.”

Figure 1: Sascha Marcelina overview and drill hole location

  • Pellegrini Trend:

At the Pellegrini Trend, four diamond drill holes were completed at the main target area with two scout holes outboard on two other major northwest trending faults structures to the west and north, for a combined total of 1,431m.

Figure 2: Pellegrini plan view

Holes PEL-DDH-001, PEL-DDH-002 and PEL-DDH-005 were drilled at the Pellegrini main target zone located on the top of a prominent hill, resulting in an 80-100m elevation difference between the hill and the nearby topographic flats. They all encountered within their upper levels, restricted zones of anomalous mineralization associated with hydrothermal brecciation. Hole PEL-DDH-005, which was drilled deeper below PEL-DDH-002, exhibits the best mineralized intersection to date. A wide zone of peripheral crackle brecciation starts at 170m vertically below surface and continues into an inner core of hydrothermal polymictic brecciation for a total intercepted width of brecciation >25m. This inner zone returned an intersection of 20.4m at 0.24 g/t Au and 39 g/t Ag (58 g/t AgEq1) from 242.5m, including 10.5m at 0.28 g/t Au and 66 g/t Ag (87 g/t AgEq) from 249m. High Zn and Pb base metal results are also associated with this brecciated body with 0.82% Pb and 0.7% Zn over the broader 20.4m interval, including 1.3m with 3.19% Pb and 2.56% Zn (Figure 3, Table 1, 2 and Photo 1).

Figure 3: Pellegrini section view on PEL-DDH-001 / PEL-DDH-002 / PEL-DDH-005

Photo 1: PEL-DDH-005 – Diamond core photo 247m to 263m

These results from PEL-DDH-005 are considered very encouraging as they represent a clear downward vector for the mineralization underneath the narrower, mineralized zones intersected in each of holes PEL-DDH-001 and PEL-DDH-002. Based on several geological observations, including the “peripheral” crackle brecciation, mineralization style and silica species, this intersection is interpreted to represent the peripheral or the upper part of an untested larger body of mineralization. Further drilling is required to confirm the geometry of this mineralized hydrothermal breccia body and how it relates to the local topography.

Mineralization is associated with a multi-pulse hydrothermal event resulting in a large zone of brecciation hosting at least three distinct phases of mineralization. The earliest phase is a pyrite rich, poorly mineralized pulse, followed by Ag-Pb-Zn metal rich event. The final stage is a more typical low sulfidation epithermal silica pulse and is recognized as the Au rich event. The broad zones of brecciation in drill hole PEL-DDH-05 are hosted in pyroclastic volcanics and appear to be spatially related with the margin of a large rhyolitic dome complex, as is typical in several of the productive mineralized Au/Ag systems in the Santa Cruz province of Argentina.

The widespread high resistivity anomaly present at Pellegrini also correlates well to the dome complex and related highly siliceous outflows mapped on surface. The innermost central “reduced” resistivity response corresponds with the mineralized hydrothermal brecciation, which is interpreted to be located along the outer limits of the dome margins in contact with pyroclastic volcanics. This reduced resistivity feature may represent the outline of the “top” of a larger mineralized breccia body, which has less pervasive silica compared to that of the surrounding host rocks (Figure 2).

As a follow-up, Mirasol is in the planning stages for a second complementary and deeper penetrating induced polarization (“IP”) geophysics program to more accurately map the location and orientation of this apparent northwest trending, northeast dipping sulfide-rich breccia.

  • Estancia Trend:

At the Estancia Trend, six holes (1,011m) were completed. Three of these holes located in the southern part of the prospect (Estancia Sur) returned anomalous Au results (Figure 4). This drilling demonstrated that Estancia Sur is located in the lower part of the Matilda formation or upper part of the Chon Aike, neither of which are good, competent host rocks for productive fissure veins. Instead of concentrating mineralization, their physical characteristics allow for wider intersections of lower grade and dispersed mineralization, as illustrated by the results from drill hole EST-DDH-003 (8.7m at 0.32 g/t Au). However, with focused, deeper drilling, it is considered likely that a stronger mineralization could be encountered in the more permissive rock type (mid to lower Chon Aike formation).

Mineralization encountered to date at Estancia Sur occurs as narrow sheeted veinlets, pseudo-stockworks zones and fluidized channels with crackle brecciation, infilled with two styles of mineralization with an initial pulse of massive pyrite with dark grey silica and a second pulse of more epithermal crypto-crystalline quartz hosting the higher Au grades.

Figure 4: Estancia plan view and section on EST-DDH-003

  • Igloo Trend:

At the Igloo Trend, limited initial drilling intercepted mineralization very similar to that of Estancia Sur, related to narrow veinlets, zones of pseudo-stockwork and fluidized channels hosting brecciation, with Au grades up to 0.57 g/t. This mineralization is associated with a pronounced and widespread “cloud” of pathfinder elements characterised by arsenic, antimony and mercury + barium (Figure 5). Such zones of anomalous pathfinder elements typically reside above productive systems in several low sulfidation Au-Ag epithermal mines and deposits in Santa Cruz and provide a strong vector to depth for stronger mineralization.

Figure 5: Igloo plan view and section on IGL-DDH-002

About Mirasol Resources Ltd

Mirasol is a well-funded exploration company focused in Chile and Argentina. Mirasol has seven partner-funded projects, two with Newcrest Mining Ltd (Chile), and one with each First Quantum Minerals (Chile), Mine Discovery Fund (Chile), Mineria Activa (Chile), Silver Sands Resources (Argentina), and Patagonia Gold (Argentina). Mirasol is currently self-funding exploration at two projects, Inca Gold (Chile) and Sacha Marcelina (Argentina).

For further information, contact:

Tim Heenan, President
or
Jonathan Rosset, VP Corporate Development

Tel: +1 (604) 602-9989
Email: contact@mirasolresources.com
Website: www.mirasolresources.com

Qualified Person Statement: Mirasol’s disclosure of technical and scientific information in this press release has been reviewed and approved by Tim Heenan (MAIG), the interim President for the Company, who serves as a Qualified Person under the definition of National Instrument 43-101.

QAQC: Mirasol applies industry standard exploration sampling methodologies and techniques. All geochemical rock and drill samples are collected under the supervision of the company’s geologists in accordance with industry practice. Geochemical assays are obtained and reported under a quality assurance and quality control (QA/QC) program with insertions of controls (standards, blanks and duplicates, representing 5%, 4% and 5% of the samples respectively). Standards and blanks are inserted randomly in all drill core batches that are submitted to the laboratory, while duplicates are done on both the coarse reject (2.5%) and pulps (2.5%). Drill core samples have a minimum of 0.30m and a maximum of 2.00m in length. Samples are dispatched for analysis to Alex Stewart International Labs in Argentina, an ISO 9001:2015 accredited laboratory, which is independent from the Company. The samples are delivered to the laboratory by Mirasol personnel, a dedicated private courier, or by the dedicated laboratory pick-up service. Core diameter is generally HQ/HQ3 and samples are analysed by Fire Assay for both Au and Ag and also by ICP MS including a package of 48 elements. Ag sample results that are >100 ppm are automatically re-analysed by a gravimetric analysis and base metals (Pb/Zn) and other high sulphur minerals, with results of >10,000 ppm also re-submitted to the laboratory for ICP-Ore analysis (19 elements), to obtain accurate results.

Forward Looking Statements: The information in this news release contains forward looking statements that are subject to a number of known and unknown risks, uncertainties and other factors that may cause actual results to differ materially from those anticipated in our forward-looking statements. Factors that could cause such differences include: changes in world commodity markets, equity markets, costs and supply of materials relevant to the mining industry, change in government and changes to regulations affecting the mining industry and to policies linked to pandemics, social and environmental related matters. Forward-looking statements in this release include statements regarding future exploration programs, operation plans, geological interpretations, mineral tenure issues and mineral recovery processes. Although we believe the expectations reflected in our forward-looking statements are reasonable, results may vary, and we cannot guarantee future results, levels of activity, performance or achievements. Mirasol disclaims any obligations to update or revise any forward-looking statements whether as a result of new information, future events or otherwise, except as may be required by applicable law.

Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

Table 1: Sascha Marcelina Significant Drill Intercepts

Hole IDFromToInterval
(m)
1
Au
g/t
Ag
g/t
AuEq
g/t
2
AgEq
g/t
2
Cut-off3
PEL-DDH-00134.0035.001.000.712  0.2 g/t AuEq or 15 g/t AgEq
Including34.0034.300.301.061  1 g/t AuEq or 75 g/t AgEq
 40.4041.551.150.442  0.2 g/t AuEq or 15 g/t AgEq
 93.4098.004.600.154  0.2 g/t AuEq or 15 g/t AgEq
 124.10128.504.400.322  0.2 g/t AuEq or 15 g/t AgEq
Including125.80126.300.501.270  1 g/t AuEq or 75 g/t AgEq
 152.60160.407.800.0522  0.2 g/t AuEq or 15 g/t AgEq
 171.00172.001.000.224  0.2 g/t AuEq or 15 g/t AgEq
 177.00179.502.500.1814 270.2 g/t AuEq or 15 g/t AgEq
 183.00189.006.000.216  0.2 g/t AuEq or 15 g/t AgEq
 195.00196.151.150.183  0.2 g/t AuEq or 15 g/t AgEq
 202.00216.5014.500.182  0.2 g/t AuEq or 15 g/t AgEq
PEL-DDH-00215.4015.700.300.0391  1 g/t AuEq or 75 g/t AgEq
 147.50148.501.000.0634  0.2 g/t AuEq or 15 g/t AgEq
 163.60165.001.400.212  0.2 g/t AuEq or 15 g/t AgEq
 170.00172.002.000.205  0.2 g/t AuEq or 15 g/t AgEq
 185.00188.003.000.2010  0.2 g/t AuEq or 15 g/t AgEq
PEL-DDH-005242.50262.9020.400.2539 580.2 g/t AuEq or 15 g/t AgEq
Including249.00259.5010.500.2866 871 g/t AuEq or 75 g/t AgEq
 274.00275.001.000.334  0.2 g/t AuEq or 15 g/t AgEq
 279.20286.006.800.275  0.2 g/t AuEq or 15 g/t AgEq
Including279.20279.650.451.32281.69 1 g/t AuEq or 75 g/t AgEq
PEL-DDH-00645.6049.203.600.0117  0.2 g/t AuEq or 15 g/t AgEq
EST-DDH-00194.0096.152.150.403  0.2 g/t AuEq or 15 g/t AgEq
 106.45108.702.250.544  0.2 g/t AuEq or 15 g/t AgEq
Including108.35108.700.351.499  1 g/t AuEq or 75 g/t AgEq
EST-DDH-002117.20119.001.800.527  0.2 g/t AuEq or 15 g/t AgEq
Including117.70118.200.501.04171.27 1 g/t AuEq or 75 g/t AgEq
 121.70125.603.900.343  0.2 g/t AuEq or 15 g/t AgEq
EST-DDH-0033.005.002.000.401  0.2 g/t AuEq or 15 g/t AgEq
 15.8016.100.301.25151.46 1 g/t AuEq or 75 g/t AgEq
 97.00105.708.700.323  0.2 g/t AuEq or 15 g/t AgEq
 108.00110.002.000.232  0.2 g/t AuEq or 15 g/t AgEq
 116.00118.002.000.210  0.2 g/t AuEq or 15 g/t AgEq
IGL-DDH-00237.8040.002.200.154  0.2 g/t AuEq or 15 g/t AgEq
 159.60162.803.200.308  0.2 g/t AuEq or 15 g/t AgEq
ECT-DDH-001No interval above cut-off
ECT-DDH-002No interval above cut-off
ECT-DDH-003No interval above cut-off
IGL-DDH-001No interval above cut-off
PEL-DDH-003No interval above cut-off
PEL-DDH-004No interval above cut-off

Notes:

1 Reported interval length are down hole widths and not true widths.
2 Gold equivalent (“AuEq”) and silver equivalent (“AgEq”) is calculated using metal prices of US$ 1800/oz for Au and US$ 24/oz for Ag. Recoveries are assumed to be 100% as no metallurgical test data is available. The equation used is thus: AuEq g/t = Au g/t + (Ag g/t ÷ 75) and AgEq g/t = Ag g/t + (Au g/t x 75). AuEq and AgEq are only reported if Au is > 0.1 g/t and Ag > 10 g/t and a value reported for the dominant metal.
3 Reported intervals are at the stated a cut-off grade of 0.2 g/t AuEq or 15 g/t Ag Eq (minimum width of 1m) and 1 g/t AuEq or 75 g/t AgEq. Reported intervals may include up to a maximum of 1.5m individual section below cut-off grade and Au and Ag grades are uncapped.


Table 2: Sascha Marcelina Pb/Zn Zones

Hole IdFrom (m)To (m)Interval (m)1Au g/tAg g/tPb %Zn %
PEL-DDH-005242.50262.9020.400.25390.820.70
Including247.70249.001.300.1521.463.192.56
And250.20252.602.400.2772.320.961.24
And258.75261.002.250.2551.792.821.09

Note: 1 Reported interval length are down hole widths and not true widths.


Table 3: Sascha Marcelina Collar Location

Hole IdEastingNorthingElevation (m)AzimuthDipDepth (m)
ECT-DDH-00124083404703902565.3225-50150
ECT-DDH-00224082444703873579.845-45120
ECT-DDH-00324083394704037554.3225-45231
EST-DDH-00124087614702376546.945-50177
EST-DDH-00224088274702285534.045-45165
EST-DDH-00324088894702420548.7225-50168
IGL-DDH-00124124744706219643.045-45177
IGL-DDH-00224134674705627657.9225-45195
PEL-DDH-00124104334705680697.2258-45246
PEL-DDH-00224105074705556705.3245-55222
PEL-DDH-00324097014706185683.050-55204
PEL-DDH-00424090754705187630.0250-45219
PEL-DDH-00524106024705602719.0245-55309
PEL-DDH-00624103154705423680.0242-55231



1 Silver equivalent (“AgEq”) is calculated using metal prices of US$ 1800/oz for Au and US$ 24/oz for Ag. Recoveries are assumed to be 100% as no metallurgical test data is available.
The equation used is: AgEq g/t = Ag g/t + (Au g/t x 75)