The Worldwide Tangential Flow Filtration Industry is Expected to Reach $2.8 Billion by 2027

Dublin, IRELAND


Dublin, May 11, 2022 (GLOBE NEWSWIRE) -- The "Tangential Flow Filtration Market by Product (System, Membrane Filter), Material (PES, PVDF, PTFE), Technique (Ultrafiltration), Application (Final Product Processing, Raw Material Filtration), End User (Pharma, Biotech), Region - Global Forecast to 2027" report has been added to ResearchAndMarkets.com's offering.

The global tangential flow filtration market is projected to USD 2.8 billion by 2027 from USD 1.5 billion in 2022, at a CAGR of 13.2% during the forecast period.

The rising advantages of tangential flow filtration over normal flow filtration, increasing adoption of single-use technologies, and growing R&D spending in pharma-biotech companies. On the contrary, the high capital investments for setting up new production facilities are expected to restrain the market growth.

In 2021 the single-use systems segment accounted for the largest share of the tangential flow market

The tangential flow filtration market is segmented into single-use systems, reusable systems, membrane filters, and filtration accessories on the basis of products. The single-use systems segment in 2021, dominated the market with the largest share and is anticipated to grow at the highest CAGR during the forecast period owing to the minimal chances of cross-contamination risks associated with these systems

The microfiltration techniques dominated the market the largest share of the technique segment in 2021

On the basis of technique, the tangential flow filtration market is segmented into microfiltration, ultrafiltration, nanofiltration, and other techniques. The microfiltration segment dominated the market with highest market share in 2021. Several advantages of microfiltration over other techniques, for instance, low operating pressure requirement, ease of usage coupled with reduced energy consumption, cost-effectiveness, elimination of energy-consuming phases such as evaporation along with the requirement of limited manual actions are some of the key factors increasing the market growth for the segment

The final product processing application accounted for the largest market share of this market in 2021

Based on application, the tangential flow filtration market is segmented into final product processing, raw material filtration, cell separation, water purification, and air purification. The final product processing segment is further divided into API filtration, protein purification, vaccine and antibody processing, formulation and filling solutions, and viral clearance. The raw material filtration segment is further divided into media & buffer filtration, prefiltration, and bioburden reduction. In 2021, the final product processing segment accounted for the largest share of the global tangential flow filtration market. The rapidly growing biopharmaceutical industry and increased generics and biologics production are the key growth drivers for this application segment.

Asia Pacific: The fastest-growing region in the tangential flow filtration market

The tangential flow filtration market is segmented into North America, Europe, Asia Pacific, Latin America (LATAM) and Middle East and Africa (MEA). The Asia Pacific market is expected to register the highest CAGR during the forecast period. ). The Asia Pacific market is expected to register the highest CAGR during the forecast period. Some of the major factors contributing to the growth of the Asia Pacific market are the growing prevalence of viral diseases, increasing R&D spending on biopharmaceutical projects, expansion of production of generics, and biotechnology industry growth in developing countries.

Key Topics Covered:

1 Introduction

2 Research Methodology

3 Executive Summary

4 Premium Insights
4.1 Tangential Flow Filtration Market Overview
4.2 North America: Tangential Flow Filtration Market, by Product and Country (2022)
4.3 Tangential Flow Filtration Market Share, by Application, 2022 Vs. 2027
4.4 Tangential Flow Filtration Market Share, by Technique, 2022
4.5 Tangential Flow Filtration Market: Geographic Growth Opportunities

5 Market Overview
5.1 Introduction
5.2 Market Dynamics
5.2.1 Drivers
5.2.1.1 Growing Advantages of Tangential Flow Filtration Over Normal Flow Filtration
5.2.1.2 Rising R&D Spending in Pharmaceutical & Biotechnology Industries
5.2.1.3 Increasing Adoption of Single-Use Technologies
5.2.1.4 Increased Adoption of Good Automated Manufacturing Practice (Gamp)
5.2.2 Restraints
5.2.2.1 High Capital Investments for New Production Facilities to Limit the Entry of Small Players
5.2.3 Opportunities
5.2.3.1 Emerging Economies Offer Lucrative Growth Opportunities
5.2.3.2 Rising Therapeutic Applications of Recombinant Proteins
5.2.4 Challenges
5.2.4.1 Increased Complexities Introduced by the Interaction of Charged Excipients and Proteins to Restrict the Market Growth
5.2.4.2 Difficulty in the Survival of Small Players and New Entrants
5.3 Ranges/Scenario
5.4 Impact of COVID-19 on the Tangential Flow Filtration Market
5.5 Trends/Disruptions Impacting Customer's Business
5.6 Pricing Analysis
5.7 Value Chain Analysis
5.8 Supply Chain Analysis
5.9 Ecosystem Analysis
5.10 Patent Analysis
5.11 Key Conferences and Events
5.12 Regulatory Analysis
5.12.1 United States Pharmacopoeia (Usp) Class Vi
5.12.2 Current Good Manufacturing Practice
5.13 Porter's Five Forces Analysis
5.14 Key Stakeholders and Buying Criteria
5.14.1 Key Stakeholders in Companies and Their Influence on the Buying Process
5.14.2 Key Buying Criteria for Tangential Flow Filtration Products

6 Tangential Flow Filtration Market, by Product
6.1 Introduction
6.2 Single-Use Systems
6.2.1 Reduced Need for Product Validation and Minimized Cross-Contamination Risks Are the Advantages of Single-Use Systems
6.3 Reusable Systems
6.3.1 Reusable Systems Are Expected to Grow at a Slower Rate During the Forecast Period
6.4 Membrane Filters
6.4.1 Cassettes
6.4.1.1 The Cassettes Segment Dominates the Membrane Filters Market
6.4.2 Capsules & Cartridges
6.4.2.1 Increased Flow Path and Higher Efficiency of Hollow-Fiber Filters Have Contributed to the Significant Market Share of Capsules & Cartridges
6.5 Filtration Accessories
6.5.1 Rising Adoption of TFF Systems and Membrane Filters Will Drive the Use of Associated Accessories

7 Tangential Flow Filtration Market, by Membrane Material
7.1 Introduction
7.2 Pes
7.2.1 High Reliability and Wide Applications Have Ensured the Market Dominance of Pes
7.3 Polyvinylidene Difluoride (Pvdf)
7.3.1 Adherence of Pvdf Material to Fda, Usp, and Eec Requirements to Increase Demand Among End-users
7.4 Nylon
7.4.1 Increased Endotoxin Adsorption Capacity of Nylon Filters to Drive Its Demand in Pharmaceutical Applications
7.5 Polytetrafluoroethylene (Ptfe)
7.5.1 Wide Advantages of Ptfe Membrane Material to Support Market Growth
7.6 Mixed Cellulose Ester & Cellulose Acetate (Mce & Ca)
7.6.1 Mce Membranes Are Chemically Inert and Are Used in Analytical and Research Applications
7.7 Polycarbonate Track Etch (Pcte)
7.7.1 Pcte Membrane Filters Are Used in Cell Biology and Analytical Testing Applications
7.8 Regenerated Cellulose
7.8.1 Wide Applications in Upstream Processing to Boost Market Growth
7.9 Other Membrane Materials

8 Tangential Flow Filtration Market, by Technique
8.1 Introduction
8.2 Microfiltration
8.2.1 Microfiltration is Used for Harvesting Cells in Upstream Bioprocessing
8.3 Ultrafiltration
8.3.1 Ultrafiltration is Used in the Biopharmaceutical Industry for Cell Harvesting After Fermentation
8.4 Nanofiltration
8.4.1 High Energy Consumption Hinders Market Growth
8.5 Other Techniques

9 Tangential Flow Filtration Market, by Application
9.1 Introduction
9.2 Final Product Processing
9.2.1 Active Pharmaceutical Ingredient (API) Filtration
9.2.1.1 Need for Continuous Filtration of Apis to Propel Market Growth
9.2.2 Protein Purification
9.2.2.1 Increasing Demand for Protein Therapeutic Drugs to Drive the Market
9.2.3 Vaccine & Antibody Processing
9.2.3.1 Rising Incidence of COVID-19 to Drive the Market for Vaccine and Antibody Processing
9.2.4 Formulation & Filling Solutions
9.2.4.1 Growing Need for Aseptic Filling and Bioburden Reduction to Support Market Growth
9.2.5 Viral Clearance
9.2.5.1 Growing Manufacturing Volumes to Propel Market Growth
9.3 Raw Material Filtration
9.3.1 Media & Buffer Filtration
9.3.1.1 Growth in the Manufacturing of Biopharmaceuticals to Drive the Market
9.3.2 Prefiltration
9.3.2.1 Prefiltration Removes Contaminants from Fluid Streams Through Direct Interception and Sieving
9.3.3 Bioburden Testing
9.3.3.1 Bioburden Testing is Mandatory for Pharmaceutical Production
9.4 Cell Separation
9.4.1 Growing Demand for Personalized Medicine to Drive the Market
9.5 Water Purification
9.5.1 Purified Water is Used for the Manufacturing of Pharmaceutical Drugs
9.6 Air Purification
9.6.1 Adoption of Gmp Practices to Drive the Market

10 Tangential Flow Filtration Market, by End-user
10.1 Introduction
10.2 Pharmaceutical & Biotechnology Companies
10.2.1 Pharmaceutical & Biotechnology Companies Are the Largest & Fastest-Growing End-users in the Market
10.3 Contract Manufacturing Organizations & Contract Research Organizations
10.3.1 Increasing Demand to Outsource the Production Function to Cmos & Cros is Supporting the Growth of this End-User Segment
10.4 Academic Institutes & Research Laboratories
10.4.1 Increasing R&D Expenditure is Supporting the Growth of this End-User Segment

11 Tangential Flow Filtration Market, by Region

12 Competitive Landscape
12.1 Introduction
12.2 Right-To-Win Approaches Adopted by Key Players
12.3 Market Share Analysis
12.4 Revenue Analysis
12.5 Company Evaluation Quadrant
12.5.1 Stars
12.5.2 Emerging Leaders
12.5.3 Pervasive Players
12.5.4 Participants
12.6 Competitive Benchmarking of Top 25 Players
12.6.1 Company Footprint (25 Companies)
12.6.2 Company Product Footprint (25 Companies)
12.6.3 Company End-User Footprint (25 Companies)
12.6.4 Company Regional Footprint (25 Companies)
12.7 Company Evaluation Quadrant: Start-Ups/SMEs
12.7.1 Progressive Companies
12.7.2 Starting Blocks
12.7.3 Responsive Companies
12.7.4 Dynamic Companies
12.8 Competitive Benchmarking of Startup/SME Players
12.9 Competitive Scenario and Trends
12.9.1 Deals
12.9.2 Other Developments

13 Company Profiles
13.1 Key Players
13.1.1 Merk Kgaa
13.1.2 Danaher Corporation
13.1.3 Sartorius Ag
13.1.4 Parker Hannifin Corporation
13.1.5 Repligen Corporation
13.1.6 Alfa Laval Corporate Ab
13.1.7 Andritz
13.1.8 Meissner Filtration Products, Inc.
13.1.9 Cole-Parmer Instrument Company, LLC
13.1.10 Solaris Biotechnology Srl (Acquired by Donaldson Company, Inc.)
13.1.11 Koch Separation Solutions
13.1.12 Sterlitech Corporation
13.1.13 Synder Filtration, Inc.
13.2 Other Companies
13.2.1 Pendotech
13.2.2 Artesyn Biosolutions
13.2.3 Microfilt India Pvt. Ltd.
13.2.4 Bionet
13.2.5 Sysbiotech Gmbh
13.2.6 Cobetter Filtration Equipment Co. Ltd.
13.2.7 Biotree
13.2.8 Formulatrix
13.2.9 Mantec Technical Ceramics Ltd.
13.2.10 Smartflow Technologies, Inc.
13.2.11 Tami Industries
13.2.12 Spf Technologies, LLC

14 Appendix

For more information about this report visit https://www.researchandmarkets.com/r/8udkgb

Attachment

 
Global Tangential Flow Filtration Market

Contact Data