MONTREAL, Nov. 14, 2023 (GLOBE NEWSWIRE) -- Midland Exploration Inc. (“Midland”) (TSX-V: MD) is pleased to report that following the approval of permits, drilling has resumed along the extensions of the new Santos nickel-copper (“Ni-Cu”) discovery located on the Tête Nord property. This property is currently wholly owned by Midland but is subject to an option agreement with Rio Tinto Exploration Canada Inc. (“RTEC”) since December 2021 and is located near the town of La Tuque, Quebec (see press release by Midland dated December 2, 2021).
This new drilling program targeting the Santos zone consists of four (4) drill holes totalling 1,150 metres and is mainly designed to test new conductors identified at depth on the Santos zone following downhole and ground-based electromagnetic surveys.
The Santos Ni-Cu zone was discovered in early 2023 following the drill testing of an electromagnetic VTEM anomaly. The discovery hole (MDLD0015) intersected, from 14 metres to 80 metres downhole depth, several layers with Ni-Cu mineralization within altered gabbro horizons. From 20.11 to 22.79 metres, the drill hole intersected 1.10% Ni and 0.71% Cu over 2.68 metres. Further down, from 33.02 to 43.39 metres, a mineralized interval graded 0.45% Ni and 0.18% Cu over 10.37 metres (see press release by Midland dated April 27, 2023).
A second shallow hole was drilled in July 2023 on the Santos zone, approximately 50 metres west of the discovery hole. After going through 11.66 metres of overburden, drill hole MDLD0018 intersected a mineralized zone grading 0.33% Ni and 0.12% Cu over 39.73 metres, from 11.66 to 51.39 metres downhole depth (see press release by Midland dated October 12, 2023). The interval exhibits impressive magmatic breccias with decimetre-scale semi-massive sulphide zones, indicative of a dynamic magmatic system at Santos. The two drill holes, MDLD0015 and MDLD0018, began directly in the mineralized zone; the total thickness of this zone has yet to be determined and the zone remains open in all directions.
A very similar target as Santos, occurs 770m to the south. The Santos South target consists of a subtle airborne EM located in a very similar fold structure as the Santos occurrence. One drill hole totaling 300m will be drilled to test this target.
Additional targets were also selected for another phase of drill testing (5-7 drill holes) in early 2024, in the Bonhomme and Cutaway-East areas.
Regionally, the new Santos Ni-Cu zone is favourably located along a N-S-trending structure, approximately 8 kilometres north of the former Lac Edouard Ni-Cu mine.
About the Tête Nord Ni-Cu property
The Tête Nord property covers mafic and ultramafic rocks of the La Bostonnais Complex north of La Tuque, which hosts the former Lac Edouard mine that historically produced 50,000 tonnes of ore grading 1.50% Ni and 0.50% Cu (source: SIGEOM NTS sheet 31P09).
This property hosts a few mineral occurrences, including the Savane showing located approximately 25 kilometres south of the former Lac Edouard mine. This Ni-Cu showing was discovered by prospecting in 1995 when grab samples collected in a pyroxenite yielded historical values of 1.80% Ni and 0.20% Cu. Another grab sample from a subcropping boulder also yielded grades of 1.98% Ni and 0.46% Cu about 250 metres north of the Savane showing (Source: SIGEOM NTS sheet 31P07; GM55352).
Cautionary statements:
Note that grab sample grades may not be representative of mineralized zones.
The true thickness of reported intervals cannot be determined with the information currently available; intervals are thus reported in core length.
Mineralization occurring at the former Lac Edouard mine is not necessarily indicative of mineralization that may be found on the Tête Nord property held by Midland in partnership with RTEC.
Quality Control
Drill core samples were sent to ALS Thunder Bay for preparation and ALS Vancouver for analysis. Samples were prepared by the RIORCK package where the entire sample is crushed to 70% less than 2mm using a Boyd crusher-splitter combination, then 1kg of material is pulverized to better than 85% passing 75 microns. This method includes between-sample washes on both the crushers and pulverizers. The samples were analyzed for a full element suite using lithium borate fusions (ME-ICP06 and ME-MS81), four acid digestions (ME-4ACD81), S and C by induction furnace (ME-IR08) and Au-Pt-Pd by an ultralow detection 30g fire assay (PGM-MS23L). The MDLD0018 batch of 59 samples included 3 CRMs, 2 blanks, and 2 core duplicates for a QC insertion rate of 13%. The certified reference materials were in-house standards TAM26 and TAM28, all independently manufactured and independently certified, and a commercial standard OREAS 86. ALS included laboratory QC of a range of blank and CRM materials, and 7 RTX samples were analyzed twice as pulp duplicates.
About Midland
Midland targets the excellent mineral potential of Quebec to make the discovery of new world-class deposits of gold and critical metals. Midland is proud to count on reputable partners such as RTEC, BHP Canada Inc., Barrick Gold Corp., Wallbridge Mining Company Ltd, Probe Gold Inc., Agnico Eagle Mines Limited, Osisko Development Corp., SOQUEM Inc., Brunswick Exploration Inc., Nunavik Mineral Exploration Fund, Cosmos Exploration Limited and Abcourt Mines Inc. Midland prefers to work in partnership and intends to quickly conclude additional agreements in regard to newly acquired properties. Management is currently reviewing other opportunities and projects to build up Midland’s portfolio and generate shareholder value.
Qualified Person and VP Exploration Mario Masson prepared this press release and verified the Tête Nord project data as Midland’s qualified person (QP) within the meaning of National Instrument 43-101.
For further information, please consult Midland’s website or contact:
Gino Roger, President and Chief Executive Officer
Tel.: 450 420-5977
Fax: 450 420-5978
Email: info@midlandexploration.com
Website: https://www.midlandexploration.com/
Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.
This press release may contain forward-looking statements that are subject to known and unknown risks and uncertainties that could cause actual results to vary materially from targeted results. Such risks and uncertainties include those described in Midland’s periodic reports including the annual report or in the filings made by Midland from time to time with securities regulatory authorities.
Photos accompanying this announcement are available at:
https://www.globenewswire.com/NewsRoom/AttachmentNg/8dd58f66-52ae-497a-a1a9-ab87b1525a54
https://www.globenewswire.com/NewsRoom/AttachmentNg/a66b2daa-5890-4f2e-a8eb-7be1488e0ed7
https://www.globenewswire.com/NewsRoom/AttachmentNg/3cfd025a-b333-47ce-a397-341ebc030470
https://www.globenewswire.com/NewsRoom/AttachmentNg/3b4968db-c649-4860-b502-d28ccc19c8b6
https://www.globenewswire.com/NewsRoom/AttachmentNg/5ceaaa5e-ed04-470b-9c2d-64ff9f9661d7
https://www.globenewswire.com/NewsRoom/AttachmentNg/1094da44-555e-4f73-86df-e7f7d9c46767
https://www.globenewswire.com/NewsRoom/AttachmentNg/a003464c-a020-4781-bb85-d455bfbcd59d
https://www.globenewswire.com/NewsRoom/AttachmentNg/89148779-2c9d-4f29-b5a6-c5ccd015fb22
