VANCOUVER, BRITISH COLUMBIA--(Marketwired - Jan. 22, 2014) - Gold Standard Ventures Corp. (TSX VENTURE:GSV)(NYSE MKT:GSV)(NYSE Amex:GSV) ("Gold Standard" or the "Company") (www.goldstandardv.com) today released results from RR13-14, the most recent hole drilled (in late 2013) into the North Bullion deposit. Results include an interval of 30.6 meters of 1.23 gAu/T starting at 294.7meters and 39.9 meters of 0.65 gAu/T starting at 337.5 meters. These intervals effectively offset and extend the critical lower breccia zone another 65 meters (200 ft) to the west of RR13-11. The North Bullion deposit remains open to further expansion to the west and to the north. Another step-out, RR13-15, is set to be drilled about 65 meters further to the west (see map below).

Gold Standard also reported that Newmont USA Limited, a subsidiary of Newmont Mining Corporation (NYSE:NEM) ("Newmont") has provided the Company with the results of metallurgical tests of drill core from the North Bullion deposit conducted by Newmont. The tests were designed to determine if North Bullion deposit mineralization is amenable to the established recovery technologies commonly used for Carlin-type ores. Three samples were taken from composited quarter-cut North Bullion drill core; all three samples were considered to be refractory material. The samples assayed 2.30gAu/T (0.067 ozAu/st), 11.7gAu/T (0.340 ozAu/st) and 8.06gAu/T (0.235 ozAu/st). Gold recoveries were 83.1%, 90.0% and 78.8% respectively, indicating that North Bullion mineralization is likely to be conducive to roaster processing.

Highlights:

• Drill holes RR13-08, RR13-11, together with the most recent hole RR13-14, appear to indicate a west-trending "bulge" or "extension" in the North Bullion deposit. This change in mineralization pattern could represent an association with an important west-northwest-trending feeder structure.
• The North Bullion gold mineralization appears to be conducive to roaster processing.

Metallurgical test details:

Three samples of material from the Railroad property were provided to Newmont. Each sample was taken from drill core and was expected to be refractory. A scope of work was generated to conduct head assays (duplicate fire assays, AuCN assays, and preg-rob assays), carbon and sulfur assays with a LECO furnace and a multi-element ICP-MS assay. The samples were carbonaceous and sulfidic refractory with very different gold grades, arsenic grades and sulfide sulfur contents.All three samples responded reasonably well to bench top roast tests with recoveries between 78% and 90%.

Sample #1 represents a 95 foot lower breccia interval from 1200 to 1295 feet in hole RR11-18.

Sample #2 represents a 45 foot upper breccia interval from 960 to 1005 feet in hole RR12-01.

Sample #3 represents a 20 foot lower breccia interval from 1160 to 1180 feet in hole RR13-08.

Table 1: Head Assays
Sample ID	AuTG (Opt)	AA/FA (%)	Calc. PR (opt)	Sulfide Sulfur (%)	Organic Carbon (%)	Carbonate Carbon (%)	Silver (ppm)	Arsenic (ppm)	Copper (ppm)	Mercury (ppm)	Nickel (ppm)	Zinc (ppm)
RR11-18	0.067	4.2	0.026	1.20	0.30	0.10	1.08	235	20	11	40	880
12-01A	0.340	13.5	0.024	3.26	0.53	0.34	0.30	2,473	40	78	46	54
13-08	0.235	2.4	0.049	6.16	0.61	0.32	0.70	1,005	47	46	47	2,029

Roaster recoveries varied between 78.8% and 90% as shown in Table 2. The cause of the recovery variances was not determined. Sulfide sulfur burns were between 94% and 96% and organic carbon burns were between 78% and 93%. The results suggest that the roast was complete. The calcines had calculated preg-rob values between 0 and 0.007 opt with AA/FA ratios between 77% and 84% further supporting the conclusion that all the organic carbon was burned.

Table 2: Roast Test Results
Sample ID	Recovery (%)	Sulfide Sulfur Burn (%)	Organic Carbon Burn (%)	Calcine Calc. PR (opt)		Calcine AA/FA (%)	NaCN Demand (lb/ton)	Lime Demand (lb/ton)
RR11-18	83.1	96	78	0.007		77	1.81	15.4
12-01A	90.0	94	90	0.000		84	1.81	21.6
13-08	78.8	96	93	0.001		76	1.01	15.2

Dave Mathewson, Gold Standard's Vice President of Exploration, stated: "We are pleased with the metallurgical results for the North Bullion gold deposit. The results indicate that the refractory material is suitable to either roaster or autoclave beneficiation and these facilities exist within reasonable trucking distance of our Railroad project. We are also excited by the continuing lateral expansion of the North bullion deposit. Each successive hole is adding significant mineralized tonnage which we expect to be reflected in the resource estimate scheduled for later this year."

North Bullion Drilling update:

Gold Standard is also pleased to report the final assay results for the late 2013 North Bullion drilling campaign. Hole RR13-14 is a -85° east directed hole designed to provide a west offset of the lower breccia mineralization encountered in holes RR13-08 and 11. The hole encountered a total of about 70 meters of gold mineralization within the lower breccia (see table below). Of particular importance in this hole is the style and degree of silica, barite, and dolomite alteration at this distance from the Bullion Fault Corridor. The strength and amount of this alteration strongly suggest proximity to a system feeder structure. This hole steps further away from the Bullion Fault Corridor structure zone therefore another feeder structure at different location and orientation appears to be in play.

Please go to http://goldstandardv.com/images/drill-hole-locations.jpg to see North Bullion Target Area Map.

Please see table below for detailed Intercepts for RR13-14.

Drill Hole	Intercept (m)	Thickness (m)	Au Grade (g/t)
RR13-13	Precollar Set
RR13-14	284.3-285.8	1.5	0.53
	294.7-325.3	30.6	1.23
Including	297.9-307.5	9.6	2.47
	337.5-377.4	39.9	0.65
	501.2-504.6	3.4	0.34

*note: the gold intervals reported in the above table are based on a 0.250 g Au/t (0.007 oz Au/st) cutoff. Weighted averaging has been used to calculate all reported intervals. The reported gold intervals may, or may not represent true thicknesses and, or widths. In general, the gold distribution within these large, complex breccia bodies tends to be irregular and will require additional drilling to establish true widths.

Sampling Methodology, Chain of Custody, Quality Control and Quality Assurance:

All sampling was conducted under the supervision of the Company's project geologists and the chain of custody from the drill to the sample preparation facility was continuously monitored. Core was cut at the company's facility in Elko and one half was sent to the lab for analysis and the other half retained in the original core box. A blank, quarter core duplicate or certified reference material was inserted approximately every tenth sample. The samples are delivered to ALS Minerals preparation facility in Elko. The samples are crushed and pulverized and sample pulps are shipped to ALS Minerals certified laboratory in Vancouver. Pulps are digested and analyzed for gold using fire assay fusion and an atomic absorption spectroscopy (AAS) finish on a 30 gram split. All other elements are determined by ICP analysis. Data verification of the analytical results includes a statistical analysis of the duplicates, standards and blanks that must pass certain parameters for acceptance to insure accurate and verifiable results.

The scientific and technical content and interpretations contained in this news release have been reviewed, verified and approved by Steven R. Koehler, Gold Standard's Manager of Projects, BSc. Geology and CPG-10216, a Qualified Person as defined by NI 43-101, Standards of Disclosure for Mineral Projects.

ABOUT GOLD STANDARD VENTURES - Gold Standard Ventures is focused on the acquisition and exploration of gold projects in North Central Nevada. Gold Standard currently holds a portfolio of projects totaling approximately 40,000 acres of prospective ground within North Central Nevada and the Walker Lane of which 18,130 acres comprise the flagship Railroad Gold Project on the productive Carlin Gold Trend.

Neither the TSXV nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) nor the NYSE MKT accepts responsibility for the adequacy or accuracy of this news release.

On behalf of the Board of Directors of Gold Standard,

Jonathan Awde, President and Director

CAUTIONARY NOTE REGARDING FORWARD-LOOKING STATEMENTS

This news release contains forward-looking statements, which relate to future events or future performance and reflect management's current expectations and assumptions. Such forward-looking statements reflect management's current beliefs and are based on assumptions made by and information currently available to the Company. All statements, other than statements of historical fact, included herein including, without limitation, statements about our current drill plans are forward looking statements. By their nature, forward-looking statements involve known and unknown risks, uncertainties and other factors which may cause our actual results, performance or achievements, or other future events, to be materially different from any future results, performance or achievements expressed or implied by such forward-looking statements. Such factors include, among others, the following risks: operational risks associated with mineral exploration; unanticipated geological formations, fluctuations in commodity prices; title matters; and the additional risks identified in our filings with Canadian securities regulators on SEDAR in Canada (available at www.sedar.com) and with the SEC on EDGAR (available at www.sec.gov/edgar.shtml). Furthermore, the existence of gold deposits on nearby properties is not necessarily indicative of the mineralization on our properties. These forward-looking statements are made as of the date hereof and, except as required under applicable securities legislation, the Company does not assume any obligation to update or revise them to reflect new events or circumstances.