TriMetals Mining Inc. Intersects 67 Metres of 1 g/t AuEq(i) Near Surface at the Jumbo Target on the Gold Springs Project

VANCOUVER, BRITISH COLUMBIA--(Marketwired - July 14, 2014) - TriMetals Mining Inc. (TSX:TMI)(TSX:TMI.B)(OTCQX:TMIAF)(OTCQX:TMIBF), a gold stock, is pleased to announce the results from the first ten Reverse Circulation ("RC") drill holes from the Jumbo Area at the Gold Springs gold-silver project in the mining friendly jurisdictions of Nevada and Utah, USA.

RC hole J-14-004 intersected 67 metres of 1.03 g/t AuEq* in the southern portion of the Jumbo resource block. The hole successfully extended the mineralization located in 2013 in RC holes J-13-005 and 006 both along strike and down-dip.

Hole	From (m)	To (m)	length (m)	Average Au g/t	Average Ag g/t	AuEq* g/t	True Thickness m
J-14-004	16.8	83.8	67.0	0.60	24.4	1.03	54.9
	including
	16.8	44.2	27.4	0.92	31.2	1.47	22.5
	Including
	36.6	38.1	1.5	5.48	39.6	6.17	1.2

Azimuth 2700, declination -650. Cut off 0.1g/t AuEq. *Gold Equivalent ("AuEq") uses a Au/Ag ratio of 57.14 and assumes 100% metallurgical recoveries.

Ralph Fitch, President and CEO of TriMetals Mining Inc. (the "Company") stated "These results expand the mineralized zone at Jumbo where we have established a mineral resource (Amended PEA filed on July 8, 2014) at Gold Springs. They also further confirm the continuity of the higher-grade mineralization first located by the 2013 drill program. As I stated previously, the significant upside the Company has is that less than 10% of the prospective areas at Gold Springs have been drilled, so there is a significant opportunity to expand the current zone of gold-silver mineralization through drilling. This could further enhance both the project and the Company's value as we move the project closer to production."

The results from J-14-001,002 and 003 also strongly support this higher grade zone of mineralization as shown below. These holes as a group extend the previously known mineralization envelope and confirm the importance of the 2013 Jumbo intercepts in J-13-005 and 006 and exhibit higher grades than are typically found in the Jumbo Zone:

Hole	From (m)	To (m)	length (m)	Average Au g/t	Average Ag g/t	AuEq* g/t	True Thickness m
J-14-001	56.4	106.7	50.3	0.56	24.8	0.99	41.2
including	56.4	91.4	35.0	0.68	29.9	1.20	28.7
Highest grade zone	86.9	89.9	3.0	2.12	77.6	3.48	2.5
J-14-002	45.7	61.0	15.3	0.58	19.5	0.92	14.7
Highest grade zone	48.8	51.8	3.0	1.17	26.2	1.63	2.9
J-14-003	64.0	135.6	71.6	0.46	16.6	0.76	45.8
including	64.0	97.5	33.5	0.54	26.7	1.01	21.4
Highest grade zone	131.1	134.1	3.0	2.29	17.4	2.60	2.0

*Gold Equivalent ("AuEq") uses a Au/Ag ratio of 57.14 and assumes 100% metallurgical recoveries. Cutoff 0.1 g/t AuEq*.

Drill hole J-14-001 and J-14-004 intersected the full width of the mineralized body whereas holes J-14-002 and 003 ended in mineralization suggesting the mineralized body is likely thicker than reported. J-14-003 extended mineralization beyond the previously known mineralization boundary. This higher grade block of mineralization extends for approximately 200 metres north-south and is open for expansion to the north and east.

RC holes J-14-005 through 010 all contain additional mineralization except for J-14-007 which was drilled to the east and remained in post mineral rocks above a fault and J-14-008 drilled to the NW in the south end of the zone did not intercept the main target due to faulting. RC hole J-14-010 is noteworthy in that it is located approximately 100 metres north of the Jumbo resource area and intersects what is interpreted as a new zone of mineralization east of the main trend. This hole intersected 25.9 metres at 0.65 g/t AuEq*

Sections showing the location of the reported holes can be found on the Company's website at: www.trimetalsmining.com

The drill program at Gold Springs started at Jumbo where 11 holes have been drilled, it then moved to the Etna target, 2 km south of Jumbo, which was chosen as the third target for this year's drill program. Six exploration holes were completed on the Etna target and then the drill was moved to Grey Eagle where it will explore the potential on the south end of the Grey Eagle resource area. Four holes have now been completed at Grey Eagle, all of which intersected the extensions of the vein/stockwork zone intersected in last year's drill program. Samples from these holes are presently in the laboratory for assaying.

Three bulk samples of coarse broken mineralized rock from the Grey Eagle trench have been collected for metallurgical testing and have been sent to the Kappes Cassiday metallurgical laboratory for bottle roll and column testing. Also a metallurgical test program designed to enhance silver extraction has been set up using existing RC chip samples as well as trench samples.

The following lists the results from all the 10 Jumbo RC holes:

RC Hole	Azi- muth		Incli- nation	From (m)	To (m)	length (m)	Average Au g/t	Average Ag g/t	AuEq* g/t	True Thickness m
J-14-001	270°		-65°	56.4	106.7	50.3	0.56	24.83	0.99	41.2
J-14-001				56.4	91.4	35.1	0.68	29.86	1.20	28.7
J-14-001				86.9	89.9	3.0	2.12	77.55	3.48	2.5
J-14-002	270°		-45°	45.7	61.0	15.2	0.58	19.49	0.92	14.7
J-14-002				48.8	51.8	3.0	1.17	26.20	1.63	2.9
J-14-003	270°		-80°	64.0	135.6	71.6	0.46	16.62	0.76	46.0
J-14-003				64.0	97.5	33.5	0.54	26.67	1.01	21.6
J-14-003				131.1	134.1	3.0	2.29	17.40	2.60	2.0
J-14-004	270°		-65°	16.8	83.8	67.0	0.60	24.38	1.03	54.9
J-14-004				16.8	64.0	47.2	0.69	29.41	1.20	38.7
J-14-004				16.8	44.2	27.4	0.92	31.19	1.47	22.5
J-14-004				36.6	42.7	6.1	2.17	39.03	2.85	5.0
J-14-004				36.6	38.1	1.5	5.48	39.60	6.17	1.2
J-14-005	270°		-65°	51.8	109.7	57.9	0.34	18.04	0.66	47.4
J-14-005				53.3	100.6	47.2	0.41	20.97	0.77	38.7
J-14-005				77.7	94.5	16.8	0.51	25.45	0.96	13.7
J-14-005				77.7	80.8	3.0	0.72	31.65	1.28	2.5
J-14-006	270°		-65°	71.6	141.7	70.1	0.22	10.24	0.40	57.4
J-14-006				96.0	117.3	21.3	0.29	16.78	0.58	17.5
J-14-006				112.8	115.8	3.0	0.67	22.15	1.05	2.5
J-14-007	90°		-45°	Un-mineralized
J-14-008	305°		-45°	121.9	132.6	10.7	0.15	4.39	0.22	10.3
J-14-009	270°		-45°	0.0	15.2	15.2	0.49	24.81	0.92	14.7
J-14-009				85.3	96.0	10.7	0.30	3.70	0.37	10.3
J-14-010	90°		-45°	150.9	176.8	25.9	0.54	6.24	0.65	unknown
J-14-010				150.9	155.4	4.6	1.63	16.03	1.91	unknown
J-14-010				150.9	152.4	1.5	3.99	26.00	4.44	unknown

*Gold Equivalent ("AuEq") uses a Au/Ag ratio of 57.14 and assumes 100% metallurgical recoveries. Cutoff 0.1 g/t AuEq.

About TriMetals Mining Inc.

TriMetals Mining Inc. is a growth focused mineral exploration company creating value through the exploration and development of the near surface, Gold Springs gold-silver project in mining friendly Nevada and Utah in the U.S.A.; the advancement of the large scale Escalones copper-gold project in Chile; and realization of value from the expropriated Malku Khota project in Bolivia through an arbitration process.

The Company's approach to business combines the team's track record of discovery and advancement of large projects, key operational and process expertise, and a focus on community relations and sustainable development. Management has extensive experience in the global exploration and mining industry.

The Company's common shares and Class B shares are listed on the Toronto Stock Exchange under the symbols "TMI" and "TMI.B" and the common shares and Class B shares also trade on the OTCQX market under the symbol "TMIAF" and "TMIBF". Additional information related to TriMetals Mining Inc. is available at www.trimetalsmining.com and on SEDAR at www.sedar.com.

Qualified Person

The Qualified Person on the Gold Springs property is Randall Moore, Executive Vice President of Exploration - North America of TriMetals Mining Inc. and he has reviewed and approved the content of this press release.

Quality Assurance and Quality Control

Approximately 5.5 kg of RC chips are sent to the laboratory for each 1.52 metre drill interval. 5% of the samples submitted by the Company are blanks and standards. In addition the laboratory also includes duplicates of samples, standards and blanks. The results of these check assays are reviewed prior to the release of data. All RC chip sample assays are also reviewed for their geological context and checked against the drill logs.

Assay Method: Assays were performed in Reno, Nevada by Inspectorate Laboratories, an ISO 9001:2000 Certified laboratory. Gold was analyzed by fire assay of a 30 gram sample with an AAS finish (FA430). All other elements were analyzed by the 30element, 4 acid ICP method (MA330).

Gold Equivalence: AuEq* was calculated using a gold/silver ratio of 57.14 to be consistent with that used for previously reported drill results and have not been adjusted for metallurgical recoveries.

Forward-looking Statements

Certain statements contained herein constitute "forward-looking statements". Forward-looking statements look into the future and provide an opinion as to the effect of certain events and trends on the business. Forward-looking statements may include words such as "prospective", "upside", "opportunity", "likely", "suggesting", "expansion", "further", "would", "could", "potential", "designed to", "will" and similar expressions. Information concerning the interpretation of drill results may also be considered forward-looking statements as such information constitutes a prediction of what mineralization might be found to be present if and when a mining project is actually developed. These forward- looking statements are based on current expectations and entail various risks and uncertainties. Actual results may materially differ from expectations, if known and unknown risks or uncertainties affect our business, or if our estimates or assumptions prove inaccurate. Factors that could cause results or events to differ materially from current expectations expressed or implied by the forward-looking statements, include, but are not limited to, possible variations in mineral resources, grade, metal prices; availability of sufficient financing to fund planned or further required work in a timely manner and on acceptable terms; changes in project parameters as plans continue to be refined; failure of equipment or processes to operate as anticipated; regulatory, environmental and other risks of the mining industry more fully described in the Company's Annual Information Form, which is available on SEDAR at www.sedar.com. The assumptions made in developing the forward-looking statements include: the accuracy of current resource estimates and the interpretation of drill, metallurgical testing and other exploration results; the continuing support for mining by local governments in Nevada and Utah; the availability of equipment and qualified personnel to advance the Gold Springs project; execution of the Company's existing plans and further exploration and development programs for Gold Springs, which may change due to changes in the views of the Company or if new information arises which makes it prudent to change such plans or programs.

Readers are cautioned not to place undue reliance on the forward-looking statements contained in this news release. Except as required by law, the Company assumes no obligation to update or revise any forward-looking statement, whether as a result of new information, future events or any other reason. Unless otherwise indicated, forward-looking statements in this news release describe the Company's expectations as of July 14, 2014.