GT Gold Continues to Deliver High Grade Intercepts at Saddle South Including 10.18 g/t Au over 6.87 Metres at 467 Metres Down-Hole in Hole TTD038

VANCOUVER, BRITISH COLUMBIA--(Marketwired - Nov. 8, 2017) - GT Gold Corp. ("GT Gold" or the "Company") (TSX VENTURE:GTT) is pleased to report continued high-grade assays from drilling at its Saddle gold discovery, located 10 kilometres off highway 37 on the Company's 100%-owned Tatogga property in northwestern British Columbia, Canada. Results for 9 Saddle South core holes are reported in this news release. Of particular note, hole TTD038 has extended gold mineralization to approximately 500 metres down-dip from surface intersecting 10.18 g/t Au over 6.87 metres, confirming expectations conveyed by visuals and XRF readings (see news release dated Sept. 18). Mineralization continues to be open at depth and along strike in both directions.

This year a total of 1,527 metres of RC drilling in 28 holes, and 16,180 metres of core drilling in 64 core holes were completed at the Saddle discovery. Assays for an additional 24 core holes (20 from Saddle South, 4 from Saddle North) are pending.

Highlights from the new results include:

Saddle South:

• 42.55 g/t Au over 2.59 metres from 103.23 metres (TTD037)
  • Including 98.80 g/t Au over 1.11 metres from 103.89 metres
• 12.64 g/t Au & 30.7 g/t Ag over 6.60 metres from 95.40 metres (TTD040)
  • Including 39.18 g/t Au & 139.59 g/t Ag over 1.18 metres from 97.82 metres
• 10.18 g/t Au over 6.87 metres from 463.23 metres (TTD038)
  • Including 20.65 g/t Au over 3.09 metres from 467.13 metres

Maps of drill hole locations and drill sections are included below. The same images, along with photos of core, camp and drill sites, can be obtained from the "Downloads" portion of the Company's homepage (scroll down, left) at www.gtgoldcorp.ca.

Comments:

"Saddle South continues to deliver excellent high-grade results," says Kevin Keough, President & CEO. "And now we have confirmed that mineralization continues at depth. In only four months we have accomplished 1,500 metres of RC drilling and 16,000 metres of core drilling and have achieved one of the most significant new gold discoveries of the past several years in B.C. The target area continues to offer terrific exploration upside."

Table 1 - Saddle Diamond Drill Program Assay Results: Refer to drilling plan view.

Hole Number			From (m)	To (m)	Interval (m)	Uncut Grade g/t Au	Uncut Grade g/t Ag		Comments	Zone
TTD032			252.42	262.77	10.35	1.05	2.07		Step-back	Saddle South
	Including		256.00	256.55	0.55	8.29	13.20
TTD033			131.25	136.00	4.75	7.22	76.03		West step-out	Saddle South
	Including		132.81	133.36	0.55	26.50	96.30
		And	135.00	136.00	1.00	11.15	4.90
TTD034			228.96	231.00	2.04	8.16	4.33		West step-out	Saddle South
	Including		230.38	231.00	0.62	19.20	9.40
TTD035			No significant intercepts			Step-back, undercut to 032			Saddle South
TTD036			No significant intercepts			West step-out, overcut to 037			Saddle South
TTD037			103.23	105.82	2.59	42.55	3.40		Undercut to 036	Saddle South
	Including		103.89	105.00	1.11	98.80	6.40
		And	239.60	240.77	1.17	10.11	4.07
TTD038			467.13	474.00	6.87	10.18	6.17		Deep stepback	Saddle South
	Including		467.13	470.22	3.09	20.65	12.67
TTD039			Abandoned in fault gouge at 90 metres - no significant intercepts							Saddle South
TTD040			95.40	102.00	6.60	12.64	30.70		West step-out	Saddle South
	Including		97.82	99.00	1.18	39.18	139.59

Significant intercepts for 9 diamond drill holes, arranged by hole number (see plan view and three cross-sections) are reported above. Widths reported are drilled core lengths. True widths are estimated to be approximately 90% of drilled lengths for minus 45-degree holes, 70% for minus 70-degree holes, and about 50% for minus 85-degree holes.

Table 2 - Saddle Diamond Drill Hole Details: Key information for the above 9 diamond drill holes, arranged by hole number (see plan view), is reported below. Refer to drilling plan view for location of sections.

Hole Number	Azimuth (degrees)	Dip (degrees)	Elevation (m)	Length (m)	UTM E	UTM N	Section
TTD032	0	-65	1668	312.00	433763	6408078	765
TTD033	180	-54	1695	204.00	433688	6408258	685
TTD034	180	-64	1695	252.00	433688	6408258	685
TTD035	0	-75	1668	423.00	433763	6408078	765
TTD036	180	-45	1673	258.00	433641	6408270	645
TTD037	180	-65	1673	333.00	433641	6408270	645
TTD038	0	-85	1668	513.00	433763	6408078	765
TTD039	180	-75	1673	90.00	433641	6408270	645
TTD040	180	-80	1673	324.00	433641	6408270	645

Saddle South Geology and Mineralization

Charlie Greig, Vice President, Exploration, states: "The mineralization at Saddle South varies somewhat in style, but we believe it is essentially of intermediate sulphidation epithermal type. The highest-grade sections are characterized by semi-massive to massive quartz-carbonate sulphide veins and vein-breccias dominated by pyrite with subordinate sphalerite, galena, chalcopyrite and local sulphosalts. Closely associated are narrower quartz-carbonate-pyrite and pyrite veins and veinlets; the former are commonly well-banded, multi-stage veins with well-developed coliform textures. Also, closely associated with all sulphide-rich vein styles present at Saddle, are disseminations and somewhat coarser-grained irregular aggregates of pyrite that typically occur in halos around the veins - this style of mineralization also appears to be gold-bearing and, where well-developed, it provides excellent wallrock 'support' for vein intersections. Alteration associated with the veins and their pyritic halos includes carbonate, Fe-rich chlorite, sericite, and silica with peripheral chlorite-Fe carbonate alteration.

"The mineralized zones appear to follow an overall east-west trend along a steeply dipping structure, or structures, and this zone also appears to be the locus for emplacement of a series of largely post-mineral felsic, intermediate and mafic dykes. Mineralization, dykes and the host structure cut and are at a high angle to the moderately to steeply east-northeast dipping host fragmental volcanic and volcaniclastic rocks, and local flows, which are typically characterized by the presence of fine-grained hornblende and feldspar phenocrysts in both matrix, fragments, and clasts. The host rocks have been mapped previously as part of the Lower to Middle Jurassic Hazelton Group, which hosts many significant mineral deposits in the Golden Triangle of northwestern British Columbia. A deformational overprint also characterizes the host rocks, mineralization, and many of the dykes. The host rocks are of low metamorphic rank, but in the vicinity of mineralized zones they are commonly well-foliated. All the rocks, including the mineralized ones and the younger dykes, are cut by a variety of brittle faults and fractures, and by common, discontinuous and generally narrow calcite veins. In spite of this, the mineralized zones appear to display good continuity."

QA/QC Procedures

GT Gold has implemented a rigorous quality assurance / quality control (QA/QC) program to ensure best practices in sampling and analysis of RC chips and diamond drill core, the details of which can be viewed on the Company's website at www.gtgoldcorp.ca/projects/tatogga/.

All assays are performed by ALS Canada Ltd., with sample preparation carried out at the ALS facility in Terrace, BC, and assays at the North Vancouver laboratory. Assay values are uncut. Assay results presented below are fire assay results only. For gold, fire assays are performed as per ALS protocol Au-AA26 (0.01-100.00 g/t Au) using 50 grams of sample with assays equal to or greater than 5 g/t Au calculated gravimetrically, and lower-grade samples measured by (AA) atomic absorption.

Charles J. Greig, M.Sc., P.Geo., Vice President, Exploration for GT Gold and the Company's Qualified Person as defined by NI 43-101, has reviewed and approved the technical information in this news release.

The TSX Venture Exchange does not accept responsibility for the adequacy or accuracy of this release.

Cautionary Statement Regarding Forward Looking Statements

This news release contains forward-looking statements and forward-looking information (together, "forward-looking statements") within the meaning of applicable securities laws. All statements, other than statements of historical facts, are forward-looking statements. Generally, forward-looking statements can be identified by the use of terminology such as "plans", "expects', "estimates", "intends", "anticipates", "believes" or variations of such words, or statements that certain actions, events or results "may", "could", "would", "might", "will be taken", "occur" or "be achieved". Forward-looking statements involve risks, uncertainties and other factors disclosed under the heading "Risk Factors" and elsewhere in the Company's filings with Canadian securities regulators, that could cause actual results, performance, prospects and opportunities to differ materially from those expressed or implied by such forward-looking statements. Although the Company believes that the assumptions and factors used in preparing these forward-looking statements are reasonable based upon the information currently available to management as of the date hereof, actual results and developments may differ materially from those contemplated by these statements. Readers are therefore cautioned not to place undue reliance on these statements, which only apply as of the date of this news release, and no assurance can be given that such events will occur in the disclosed times frames or at all. Except where required by applicable law, the Company disclaims any intention or obligation to update or revise any forward-looking statement, whether as a result of new information, future events or otherwise.

To view Figure 1, please visit the following link: http://media3.marketwire.com/docs/gtt1108fig1.pdf.

To view Figure 2, please visit the following link: http://media3.marketwire.com/docs/gtt1108fig2.pdf.

To view Figure 3, please visit the following link: http://media3.marketwire.com/docs/gtt1108fig3.pdf.

To view Figure 4, please visit the following link: http://media3.marketwire.com/docs/gtt1108fig4.pdf.