Silvercorp Reports High-Grade Mineralization Discovery Below Current Production Levels Within Major Vein Structures at GC Ag-Pb-Zn Mine in Guangdong Province, China

Vancouver, British Columbia, CANADA

VANCOUVER, British Columbia , Feb. 14, 2018 (GLOBE NEWSWIRE) --

Silvercorp Metals Inc. ("Silvercorp” or the “Company”) (TSX:SVM) (NYSE American:SVM) is pleased to report results of its 2016 and 2017 exploration program at its GC Ag-Pb-Zn mine, Guangdong Province, China.

In 2016 and 2017, the Company launched extensive exploration program and completed a total of 33,029 meters (“m”) of underground diamond drilling and 19,619 m of exploration tunneling at its GC Ag-Pb-Zn mine. Significant high-grade mineralized zones have been exposed at and below the current production levels, and major mineralized zones have been extended along strike and downdip.

The drilling program included infill drilling to define and upgrade the current resource model, and step-out drilling for new resources surrounding and below the current resource area. Between 2016 and 2017, 294 NQ sized diamond drill holes with total length of 33,029 meters were accomplished at 7 production levels from 150 m to -200 m at 50 m interval (the elevation of the head frame is 258.5 m). Among them, 153 holes intersected ore veins with Ag equivalent (AgEq) values greater than 194 g/t, and another 36 holes hit mineralized veins with AgEq values between 97 and194 g/t (Tab. 1).

Table 1: Summary of the drilling programs in 2016 and 2017

YearMeters DrilledHoles CompletedSamples CollectedHoles Intercepted
Holes Intercepted
201611,878 129 2,235 29 77
201721,151 165 4,595 7 76
Total33,029 294 6,830 36 153

In 2016 and 2017, 19,619 m of tunneling were driven along and across the major mineralized vein structures to upgrade the resource model and test for new vein structures. These included 7,767 m key drifts that exposed 4,803 m of ore veins, as well as 4,351 m of key raises that exposed 3,002 m of ore veins (Tab. 2).

Table 2: Summary of the tunneling programs in 2016 and 2017

YearTunneling (m)Samples CollectedKey Drifts Included (m)Ore Exposed in Drifts (m)Key Raise Included (m)Ore Exposed in Raises (m)
20169,1524,063 2,482 1,980 1,683 1,266
201710,4675,608 5,285 2,823 2,668 1,736
Total19,6199,671 7,767 4,803 4,351 3,002

Tables 3 and 4 below list assay results of some selected drill holes that intercepted ores and drift tunnels that exposed ore zones in the 2016 and 2017 exploration programs.

Table 3: Selected drilling results from the 2016 and 2017 drilling programs at GC mine

YearHole IDFrom
True Width
AgEq (1,2)
2016CK1038129.9732.742.54 V1252.1 970.11 9.65 590
2016CK1058285.7489.842.84 V36-73.7 782.66 3.21 383
2016CK1120117.4419.652.02 V28-4-152.0 2334.68 2.30 601
2016CK1130111.6827.518.64 V1-151.9 482.03 6.08 464
2016CK308608.26.39 V7E-101.2 900.62 1.69 209
2016CK308706.273.58 V7E-100.4 1341.48 4.01 416
2016CK408382.2287.64.48 V7N-145.4 451.24 3.53 290
2016CK4083103.44109.695.20 V7E-157.4 490.91 2.07 203
2016CK408450.8860.047.35 V7E-115.4 430.89 3.87 286
2016CK428017.2521.713.48 V10-99.9 451.69 5.65 421
201718CK26A04126.59132.083.77 V2-4-316.7 720.91 3.72 309
201718CK26A05277.32281.963.31 V2-2-463.7 171.21.99 5.12 537
201718CK28A05295.05297.971.97 V6-1-453.0 3102.13 14.69 1,167
2017CK10586114.16116.391.61 V9W-289.2 4910.69 5.63 813
2017CK1058833.1137.232.83 V1978.9 873.12 2.62 387
2017CK1069199.57102.382.14 V3343.1 1913.68 3.09 545
2017CK108083.1384.281.11 V40-2.6 7581.97 2.98 1,015
2017CK10982117.35128.376.51 V7E-193.2 552.02 3.55 343
2017CK1098697.06100.353.23 V1414.3 940.46 5.95 419
2017CK228256.5660.643.90 V9-9-94.0 571.21 6.52 451
2017CK2688115.76123.597.57 V2E1-245.6 640.75 4.00 306
2017CK26A84135.49138.332.56 V2E1-294.6 921.58 5.74 467
2017CK26A88106.15108.952.79 V2-1-239.4 1094.59 5.29 624
2017CK26A88128.67134.785.53 V2E1-248.1 580.82 5.65 388
2017CK28A84116.96120.933.47 V2-4-272.6 2993.00 10.54 993
2017CK28A84143.19152.17.79 V2E-289.4 1433.58 4.08 542
2017CK28A8696.9597.890.77 V18142.0 9325.83 5.05 1,501
2017CK30A83184.5191.155.01 V2E-297.6 1010.90 2.89 295

(1) Metal prices assumed: Ag USD19/Oz, Pb USD1.0/lb., Zn USD1.2/lb.
(2) Ag equivalent AgEq = Ag grade (g/t) + 53.9 x Pb grade (%) + 50.5 x Zn grade (%)

Table 4: Selected drifts that exposed ore zones at GC mine in 2016 and 2017

Drift IDVeinElevation

The step-out drilling and tunneling in the east of the mine defined new mineralized vein structures including V7E、NV10、V14、V19、V31、V32 and V33. Vein V7E has been defined 95 m in strike length, 150 m in downdip length and 0.8-1.75 m in width, with average grade of 81 g/t Ag, 1.43 % Pb and 3.08% Zn. The exploration program at -150m and -200m levels indicated that the length and width, ore continuity and ore grades improved greatly with the increase of depth (Tab. 5).

Table 5: Increases of average grades in veins V2E and V2W with depth

True Width
V2E100301.522121.42 0.59 318
 501641.24711.73 2.83 307
 02291.02741.32 2.40 266
 -502251.2941.47 2.62 306
 -1004501.481051.33 2.80 318
 -1504181.281221.94 3.35 396
 -2004001.921262.10 3.82 432
V2W100773.571000.15 2.20 219
 501742.151180.83 3.91 360
 01063.031391.71 3.38 402
 -502423.41411.62 3.48 404
 -1001282.191201.39 2.51 322
 -1501836.322775.00 6.53 876

In addition, two drill holes, 18CK26A04 and 18CK28A05, hit high-grade mineralization with true width of 3.31 m and 1.97 m, respectively, at elevation around -455 m. The host rock of the mineralization is slate, which indicated that the mineralization system is not limited to granite, but extend into the sedimentary rock underneath the granite intrusive. Also, the trend of increasing Ag, Pb, Zn and Cu grades with depth continued to below -450 m elevation. The assay results of the intercepted ore of drill hole 18CK28A05 are 310 g/t Ag, 2.13% Pb, 14.96% Zn, 0.73% Cu, 0.19% Sn and 0.34 g/t Au.

Quality Control

Drill core samples were taken from sawn half core for every 1.5m or limited by apparent wall rock and mineralization contact. Half of the core was sent to the laboratory for analysis and the other half retained for archive. The channel samples are collected along sample lines perpendicular to the mineralized vein structure in exploration tunnels. Sample length ranges from 0.2 m to more than 1.0 m, depending on the width of the mineralized vein and the mineralization type. Spacing between sampling lines is typically 5 m along strike. Both the mineralized vein and the altered wall rocks are cut with continuous chisel chipping. The samples are individually secured in cotton sample bags and then collectively secured in rice bags for shipment to the on-site laboratory.

For analysis, the sample is dried and crushed to minus 1 mm and then split to a 200-300 g subsample which is further pulverized to minus 200 mesh. A duplicate sample of minus 1 mm is made and kept at the laboratory archives. Two subsamples are prepared from the pulverized sample. One is digested with two-acids for analysis of silver, lead, zinc and copper with AAS. The other is retained as pulp reject at the lab for future reference.

A routine quality assurance/quality control (QA/QC) procedure is adopted to monitor the analytical quality at the lab. Certified reference materials (CRMs), pulp duplicates and blanks are inserted into each lab batch of samples. QA/QC data at the lab are attached to the assay certificates for each batch of samples.

The Company maintains its own comprehensive QA/QC program to ensure best practices in sample preparation and analysis of the exploration samples. Project geologists regularly insert CRM, field duplicates and blanks to each batch of core samples to monitor the sample preparation and analysis procedures at the labs. The analytical quality of the labs is further evaluated with external checks by sending about 3-5% of the pulp samples to higher level labs to check for lab bias.

Data from both the Company's and the lab’s QA/QC programs are reviewed on a timely basis by project geologists.

Guoliang Ma, P. Geo, Silvercorp’s Manager of Exploration and Resource, reviewed the exploration data and prepared the scientific and technical information regarding exploration results contained herein.  He is the Qualified Person on the project as defined under National Instrument 43-101 and has verified and approved the contents of this news release.

About Silvercorp

Silvercorp is a low-cost silver-producing Canadian mining company with multiple mines in China. The Company's vision is to deliver shareholder value by focusing on the acquisition of under developed projects with resource potential and the ability to grow organically. For more information, please visit our website at

For further information
Silvercorp Metals Inc.
Lorne Waldman
Senior Vice President
Phone: (604) 669-9397
Toll Free 1(888) 224-1881


Certain of the statements and information in this press release constitute “forward-looking statements” within the meaning of the United States Private Securities Litigation Reform Act of 1995 and “forward-looking information” within the meaning of applicable Canadian provincial securities laws. Forward-looking statements or information relate to, among other things: the price of silver and other metals; the accuracy of mineral resource and mineral reserve estimates and exploration results at the Company’s GC mine.

Forward-looking statements or information are subject to a variety of known and unknown risks, uncertainties and other factors that could cause actual events or results to differ from those reflected in the forward-looking statements or information, including, without limitation, risks relating to: fluctuating commodity prices; calculation of resources, reserves and mineralization and precious and base metal recovery; interpretations and assumptions of mineral resource and mineral reserve estimates; and exploration results.  This list is not exhaustive of the factors that may affect any of the Company’s forward-looking statements or information. Forward-looking statements or information are statements about the future and are inherently uncertain, and actual achievements of the Company or other future events or conditions may differ materially from those reflected in the forward-looking statements or information due to a variety of risks, uncertainties and other factors, including, without limitation, those referred to in the Company’s Annual Information Form for the year ended March 31, 2017 under the heading “Risk Factors”.  Although the Company has attempted to identify important factors that could cause actual results to differ materially, there may be other factors that cause results not to be as anticipated, estimated, described or intended.  Accordingly, readers should not place undue reliance on forward-looking statements or information.  

The Company’s forward-looking statements and information are based on the assumptions, beliefs, expectations and opinions of management as of the date of this press release, and other than as required by applicable securities laws, the Company does not assume any obligation to update forward-looking statements and information if circumstances or management’s assumptions, beliefs, expectations or opinions should change, or changes in any other events affecting such statements or information. For the reasons set forth above, investors should not place undue reliance on forward-looking statements and information.