Aton drills high grade sulphide mineralisation at Rodruin, with 39.4 g/t gold and 261.7 g/t silver over 9.9 metres, within an overall intersection of 88.6 metres grading 5.76 g/t gold, 42.0 g/t silver, 0.31% copper and 2.40% zinc


VANCOUVER, British Columbia, May 10, 2022 (GLOBE NEWSWIRE) -- Aton Resources Inc. (AAN: TSX-V) (“Aton” or the “Company") is very pleased to update investors on the latest assay results from the Phase 2 diamond drilling programme at its advanced Rodruin gold exploration project. Rodruin is located in the Company’s 100% owned Abu Marawat Concession (“Abu Marawat” or the “Concession”), in the Eastern Desert of Egypt.

Highlights:        

  • Diamond drilling is ongoing at Rodruin, with 35 drill holes now having been completed to date, ROD-048 and ROD-051 to ROD-084, for a total of 3,862 metres;
  • Drill holes ROD-048, ROD-070, and ROD-071 were drilled to test for potential deep sulphide mineralisation to the north of the Aladdin’s Hill zone;
  • Drill hole ROD-071 returned a mineralised intersection grading 5.76 g/t Au, 42.0 g/t Ag, 0.31% Cu and 2.40% Zn over 88.6m, from 117.2m down hole depth, which included a very high grade zone grading 39.4 g/t Au, 261.7 g/t Ag, 0.84% Cu and 3.55% Zn over 9.9m;
  • The Au-Ag-Cu-Zn sulphide mineralisation in hole ROD-071 is hosted within heavily siliceous and phyllic altered tuffogenic sediments;
  • Other drill holes also returned significant mineralised intersections including 17.1m grading 1.07 g/t Au and 15.7 g/t Ag (hole ROD-048), and 5.7m grading 4.21 g/t Au and 14.6 g/t Ag (hole ROD-070);
  • These latest results indicate the potential for the development of significant high grade polymetallic sulphide gold resources at Rodruin.

“To say that we are happy with these latest drilling results from Rodruin would frankly be a bit of an understatement” said Tonno Vahk, Interim CEO. “The sulphide intersection from hole ROD-071 is by some distance the best intersection Aton has ever drilled in Egypt, and is hugely encouraging for the deeper sulphide potential at Rodruin. The mineralisation is hosted in very strongly altered sediments, associated with significant copper and zinc sulphides, and appears to be the fresh unweathered precursor to the high grade mineralisation that we intersected in the discovery hole ROP-003 at Aladdin’s Hill in 2018. Everything that we are seeing is backing up our long held belief that the Rodruin deposit comprises zones of bulk mineralisation, containing discrete very high grade zones. There are at least two distinct mineralisation styles at Rodruin – the first hosted in sulphidic carbonates, which weather to gossans, and a second style of coarse gold bearing mineralisation hosted in heavily altered sediments. The identification of high grade primary sulphide-rich altered sediment hosted mineralisation at depth is very important, and indicates the potential for Rodruin to become a really significant sized deposit. The mineralisation at Rodruin is rather unusual, but its association with silver, zinc and copper indicates a polymetallic association that is similar to what we see at the Abu Marawat and Hamama deposits, and it is our belief that while apparently quite different, these three deposits are all genetically related. Rodruin is clearly structurally complex, but we are very much moving in the right direction with the identification of the high grade sulphide mineralisation, and we also continue to be very encouraged by the identification of coarse visible gold in holes which we are currently drilling at Aladdin’s Hill.”

Rodruin diamond drilling programme

The Rodruin prospect was discovered in December 2017 by Aton geologists (see news release dated December 14, 2017), and is located approximately 18km east of the Company’s Hamama West mineral deposit (Figure 1). During 2018 Aton constructed a c. 4.5km access road to the prospect, and undertook a highly successful 50 hole Phase 1 reverse circulation percussion (“RC”) drilling programme at Rodruin, which returned numerous mineralised intersections including 36m grading 12.47 g/t Au and 9.3 g/t Ag, from 5m downhole depth (hole ROP-003, see news release dated October 1, 2018).

The Phase 2 diamond drilling programme at Rodruin commenced in late November 2021, and results reported to date include 48.0m grading 1.97 g/t Au and 5.3 g/t Ag, from 27.0m, in hole ROD-052 (see news release dated January 25, 2022), and 88.25m grading 1.74 g/t Au and 9.7 g/t Ag, from 25.75m, in hole ROD-055 (see news release dated March 1, 2022).

After the completion of hole ROD-069 the drill rig was converted over to its standard steep hole configuration, and holes ROD-070 and ROD-071 (Figure 2) were drilled to follow up on the primary carbonate-hosted mineralisation intersected in RC hole ROP-050 (61m grading 1.55 g/t Au and 8.9 g/t Ag, from 111m, see news release dated January 29, 2019). Additionally, the vertical RC hole ROP-048 was re-entered and deepened, and re-numbered as hole ROD-048. Collar and survey details of these holes are provided in Table 1.

Hole ID
Collar co-ordinates 1Dip 2
Grid azimuth 2
EOH depth (m)
Comments
XYZ
ROD-0485524532913057748-88.1125.0219.60Re-entry of RC hole ROP-048
ROD-0705524542913051748-55.4183.8177.20Aladdin’s Hill North sulphides
ROD-0715524552913158740-68.0188.0246.40Aladdin’s Hill North sulphides
Notes:
      1)   Collar co-ordinates as laid out using handheld GPS
      2)   Collar surveys of drill holes undertaken at c. 5-6m depth, using Reflex EZ-Trac survey tool
      3)   All co-ordinates are UTM (WGS84) Zone 36R

Table 1: Collar details of diamond drill holes ROD-048, ROD-070, and ROD-071

Discussion of results

All 3 drillholes were drilled on the north-south 552450E section at Rodruin (Figure 3). Hole ROD-070 was drilled to test above the mineralised carbonate intercepted in RC hole ROP-050, whereas holes ROP-048 and ROD-071 were designed to test under this zone. Hole ROD-074 and ROD-075 have also been subsequently completed on this section, and assay results from these 2 holes are pending. Hole ROD-048 intersected a wide zone of heavily sulphidic carbonate, similar to that identified in RC hole ROP-050, whereas neither ROD-070 nor ROD-071 intersected this carbonate unit. ROD-071 intersected wide zones of heavily quartz-sericite-pyrite (“phyllic”) altered rocks (Figure 3).

Holes ROD-048 and ROD-070 intersected carbonate-hosted gold-silver-zinc oxide mineralisation from surface, with ROD-048 also intersecting deeper carbonate-hosted mineralisation at depth. Hole ROD-071 returned a long gold-silver-copper-zinc intersection associated with heavily sulphidic and silicified phyllic altered sediments. Details of intersections are provided in Table 2.

Hole ID
Intersection (m) 1Au (g/t)
Ag (g/t)
Cu (%)
Pb (%)
Zn (%)
Comments
FromToInterval
ROD-048





0.0 217.017.02.216.80.43-5.98Re-entry of RC hole ROP-048, coring started at 65.5m





48.053.05.00.782.80.02-0.26
116.7133.817.11.0715.70.010.030.33
178.8183.95.10.6422.20.830.037.45
ROD-070

0.005.75.74.2114.60.110.071.64 
18.420.62.23.358.50.030.140.96
ROD-07158.975.316.41.2023.20.030.100.09 
 117.2205.888.65.7642.00.310.032.40 
incl.138.1148.09.939.40261.70.840.023.55 
Notes:
      1)   Intersections calculated at a nominal cutoff grade of 0.3 g/t Au in runs of continuous mineralisation
      2)   Intersection previously reported – see news release dated January 29, 2019

Table 2: Mineralised intersections from diamond drill holes ROD-048, ROD-070, and ROD-071

ROD-071

Hole ROD-071 returned an intersection of 88.6m grading 5.76 g/t Au, 42.0 g/t Ag, 0.31% Cu and 2.40% Zn from 117.2m depth, including a bonanza grade interval from 138.1m, grading 39.4 g/t Au, 261.7 g/t Ag, 0.84% Cu and 3.55% Zn over 9.9m. All the assays from this intersection are provided in Appendix A. This polymetallic mineralisation is associated with a unit of dark grey, highly altered and siliceous rock, consisting primarily of quartz, sericite and sulphide and sulphosalt minerals. All original texture in the rock has been destroyed, but this unit is interpreted as consisting of very heavily altered sedimentary rocks. The mineralised interval is not believed to represent true thickness, but the orientation of the mineralised zone is not yet determined.

The mineralised interval is strongly sulphidic, carrying approximately 10% pyrite, and up to 20% very pale grey sphalerite in places, with locally very high concentrations (Figure 4). The highest bonanza grade intersection is notably elevated in both copper and zinc (Appendix A), and there appears to be a good correlation between copper with the highest grades of gold (up to 140.5 g/t, between 140.1-142.1m) and silver (up to 1105 g/t, over the same interval). It is noted that the strongest gold mineralisation appears to be associated with an increase in the level of silicification of the rock, as well as copper. It is also noted that coarse visible gold is typically associated with copper and lead/arsenic oxide minerals from the near-surface Aladdin’s Hill zone in drill core and outcrop, eg. in hole ROD-055 (see news release dated March 1, 2022).

The heavily phyllic altered unit that hosts the mineralised intersection is fault-bounded to both the south and the north, and also above by the South Ridge Thrust (“SRT”), a prominent structural feature which outcrops along the south side of the South Ridge and which dips to the north at about 40°. Hole ROD-071 intersected a separate sequence of heavily foliated quartz-sericite-pyrite rock above the SRT, which also returned a mineralised intersection grading 1.20 g/t Au and 23.2 g/t Ag over 16.4m, from 58.9m down hole on its northern faulted margin.

ROD-048 and ROD-070

Both holes ROD-048 and ROD-070 intersected gold-silver-zinc mineralisation immediately from surface, with ROD-048 returning 2.21 g/t Ag, 6.8 g/t Ag and 5.98% Zn over 17m (see news release dated January 29, 2019), and ROD-070 returning 4.21 g/t Ag, 14.6 g/t Ag and 1.64% Zn over 5.7m, in gossanous carbonate host rocks. Hole ROD-070 passed into unmineralised sediments above and below the SRT, and did not intersect further mineralisation below 20m depth. Hole ROD-048 also intersected several deeper zones of mineralisation including 1.07 g/t Au and 15.7 g/t Ag over 17.1m, from 116.7m downhole depth, in a sulphide-rich carbonate-silica-talc unit.

Discussion

The sulphide mineralisation intersected in hole ROD-071 appears to be the primary sulphide equivalent of the block of fault-bounded coarse gold bearing oxide mineralisation seen at Aladdin’s Hill. The deep sulphide mineralisation intersected in ROD-071 is hosted within a fault-bounded block of highly siliceous and altered rock, which is apparently bounded above by the SRT. This block is open at depth and along strike, and is effectively ‘blind’ as it is located directly under both the SRT and Upper Thrust (“UT”) structures (Figure 3). These blocks of heavily phyllic altered rocks, and the associated polymetallic mineralisation, are interpreted as being fault-bounded and controlled.

The regional stratigraphy consists of a sequence of predominantly tuffogenic sedimentary rocks (slates and tuffogenic sandstones), and carbonate-silica-sulphide(±talc) rocks, of undetermined origin, which host much of the gossanous mineralisation that outcrops over wide areas of the South Ridge at Rodruin. Mapping of this stratigraphy indicates that it has been heavily folded and faulted, as well as being cut by at least 2 shallow north-dipping structures – the SRT and the UT. The UT, which is roughly parallel to and controls the mountain slope on the northern flank of the South Ridge (Figure 3), appears to be a significant structure, and outcrops to the northwest of and bounds the main mineralised area at Rodruin. Its hangingwall sequence appears to consist predominantly of a series of unmineralised carbonate altered sediments. It is likely that the mineralised sequence in the footwall of the UT, which is exposed at surface on the South Ridge at Rodruin, continues to the northwest, and could be continuous at very shallow depths beneath the hangingwall sequence of rocks above the UT.

Aton believes that there is potential to identify very significant volumes of additional mineralisation at Rodruin, as the current drilling continues to indicate that it is effectively open in all directions, at depth and along strike, as well as there being potential for further blind mineralisation under the UT. The identification of the high grade primary polymetallic sulphide mineralisation associated with the phyllic altered sediments at depth is particularly significant.

The current diamond drilling programme at Rodruin was designed with the objective of testing and quantifying the potential near surface open pittable resources at Rodruin, as well as testing the deeper primary mineralisation identified during the Phase 1 RC drilling programme. The original programme has now been extended beyond its original planned meterage. Additional drilling (holes ROD-074 and ROD-075, Figure 3) has intersected further Cu-Zn sulphide mineralisation at depth, and Aton will continue to release new drill results as the assays become available.

Sample processing and analytical procedures

Drill core was logged by Aton geologists, and marked up for cutting and sampling at the Rodruin core farm. Samples were typically selected over nominal 1m intervals, but as determined by the logged lithologies. The core was half-cut by Aton staff at the onsite Rodruin sample preparation facility.

The split half-core samples were collected and bagged up in cloth bags, weighed and crushed to -4mm onsite, and split to a nominal c. 250-500g sample size. The coarse crushed reject samples are retained onsite at the Rodruin sample prep facility.

QAQC samples are inserted at a rate of approximately 1 certified reference material (or “standard” sample) every 30 samples, 1 blank sample every 15 samples, and 1 duplicate split sample every 15 samples.

The c. 250-500g dried, crushed and split samples were shipped to ALS Minerals sample preparation laboratory at Marsa Alam, Egypt where they were pulverised to a size fraction of better than 85% passing 75 microns. From this pulverised material a further sub-sample was split off with a nominal c. 50g size, which was shipped on to ALS Minerals at Rosia Montana, Romania for analysis.

Samples were analysed for gold by fire assay with an atomic absorption spectroscopy (“AAS”) finish (analytical code Au-AA23), and for silver, copper, lead and zinc using an aqua regia digest followed by an AAS finish (analytical code AA45). Any high grade gold samples (>10 g/t Au) were re-analysed using analytical code Au-GRA21 (also fire assay, but with a gravimetric finish). Any high grade Ag and base metal samples (Ag >100 g/t, and Cu, Pb and Zn >10,000ppm or >1%) were re-analysed using the ore grade technique AA46 (also an aqua regia digest followed by an AAS finish).

About Aton Resources Inc.

Aton Resources Inc. (AAN: TSX-V) is focused on its 100% owned Abu Marawat Concession (“Abu Marawat”), located in Egypt’s Arabian-Nubian Shield, approximately 200 km north of Centamin’s world-class Sukari gold mine. Aton has identified numerous gold and base metal exploration targets at Abu Marawat, including the Hamama deposit in the west, the Abu Marawat deposit in the northeast, and the advanced Rodruin exploration prospect in the south of the Concession. Two historic British gold mines are also located on the Concession at Sir Bakis and Semna. Aton has identified several distinct geological trends within Abu Marawat, which display potential for the development of a variety of styles of precious and base metal mineralisation. Abu Marawat is 447.7 km2 in size and is located in an area of excellent infrastructure; a four-lane highway, a 220kV power line, and a water pipeline are in close proximity, as are the international airports at Hurghada and Luxor.

Qualified person

The technical information contained in this News Release was prepared by Javier Orduña BSc (hons), MSc, MCSM, DIC, MAIG, SEG(M), Exploration Manager of Aton Resources Inc. Mr. Orduña is a qualified person (QP) under National Instrument 43-101 Standards of Disclosure for Mineral Projects.

For further information regarding Aton Resources Inc., please visit us at www.atonresources.com or contact:

TONNO VAHK

Interim CEO
Tel: +1 604 318 0390
Email: info@atonresources.com 

Note Regarding Forward-Looking Statements

Some of the statements contained in this release are forward-looking statements. Since forward-looking statements address future events and conditions; by their very nature they involve inherent risks and uncertainties. Actual results in each case could differ materially from those currently anticipated in such statements.

Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

Appendix A – Assay results of the ROD-071 Au-Ag-Cu-Zn sulphide intersection

Sample No.From (m)To (m)Interval (m)Au (g/t)Ag (g/t)Cu (ppm)Pb (ppmZn (ppm)
AHA-37745117.20118.150.950.516.4165036159900
AHA-37746118.15119.701.554.5127640040788100
AHA-37748119.70120.650.950.191.510401912150
AHA-37749120.65121.500.851.5411.6535018690700
AHA-37750121.50122.501.001.652.9207432380
AHA-37751122.50123.501.000.9422.6292018523800
AHA-37752123.50124.501.001.925.9844756400
AHA-37753124.50125.501.002.1310.9230028117700
AHA-37755125.50126.501.000.704.21300946630
AHA-37756126.50127.501.000.313.412104011950
AHA-37757127.50128.501.004.2117.4308010137600
AHA-37758128.50129.501.000.674431416610
AHA-37759129.50130.501.000.241.24334448
AHA-37760130.50131.501.000.311.695641855
AHA-37761131.50132.501.000.201.34244821
AHA-37763132.50133.501.001.514.318313114650
AHA-37764133.50134.501.000.3011.2954638550
AHA-37765134.50135.300.800.5022.419408218650
AHA-37766135.30136.100.800.8131.1273027347200
AHA-37767136.10137.101.000.325.5396586500
AHA-37769137.10138.101.000.203202303220
AHA-37770138.10139.101.0012.615.340504842700
AHA-37771139.10140.101.0017.461.119550368120000
AHA-37772140.10141.101.00113.07102161028365000
AHA-37773141.10142.101.00140.511051084019525000
AHA-37775142.10143.101.002.5722.25440479770
AHA-37776143.10144.101.000.3411.2324013113050
AHA-37777144.10145.101.000.4417.52120747780
AHA-37778145.10146.000.900.357.716901064340
AHA-37779146.00147.001.0082.0529786035543900
AHA-37780147.00148.001.0020.9113675043420500
AHA-37782148.00149.001.000.185.81320653210
AHA-37783149.00150.001.000.254568521170
AHA-37784150.00151.001.000.386696744740
AHA-37785151.00152.001.002.1223.320301585410
AHA-37786152.00153.001.000.3221591011490
AHA-37788153.00154.001.000.2147619754830
AHA-37789154.00155.001.000.303.56104114140
AHA-37790155.00156.001.000.363.81110881595
AHA-37791156.00157.001.000.361.610790855
AHA-37792157.00158.001.000.844.51090401610
AHA-37793158.00159.001.000.391.319421428
AHA-37794159.00160.001.000.301.419735434
AHA-37795160.00161.001.000.211.217848487
AHA-37796161.00162.001.000.371.9237613240
Sample No.From (m)To (m)Interval (m)Au (g/t)Ag (g/t)Cu (ppm)Pb (ppmZn (ppm)
AHA-37797162.00163.001.0013.4586.1514027844300
AHA-37799163.00164.001.004.2926.6357024636700
AHA-37800164.00165.001.001.4214.3254028153600
AHA-37801165.00166.001.001.5115.7228070476200
AHA-37803166.00167.001.001.0510.2412035854800
AHA-37804167.00168.001.000.866.91570215300
AHA-37805168.00169.001.000.766.3900613970
AHA-37806169.00170.001.000.593.1305953100
AHA-37807170.00171.001.000.465.61120475160
AHA-37808171.00172.001.002.9233.181202714200
AHA-37809172.00173.001.001.6518.655601028740
AHA-37810173.00174.001.000.728.62010897450
AHA-37811174.00175.001.001.5913.412455117000
AHA-37812175.00176.001.002.8327.125101198320
AHA-37813176.00177.001.000.347.93300271655
AHA-37815177.00178.001.000.357.326201459700
AHA-37816178.00179.001.002.2619.116156720400
AHA-37817179.00180.001.000.202.7474163010
AHA-37818180.00181.001.002.6527.53460548100500
AHA-37819181.00182.001.001.1914.1133518417000
AHA-37821182.00183.001.003.4637.1636028172000
AHA-37822183.00184.001.003.3122.5456027746400
AHA-37823184.00185.001.001.5016.3330022641000
AHA-37824185.00186.001.001.8829.19060885137500
AHA-37825186.00187.001.001.2117413022464600
AHA-37826187.00188.001.000.2871825153860
AHA-37828188.00189.001.000.154.3142091210
AHA-37829189.00190.001.000.447.216801612300
AHA-37830190.00191.001.001.641956201710500
AHA-37831191.00192.001.001.0914.1634010524900
AHA-37833192.00193.001.002.8625.3430072160400
AHA-37834193.00194.001.000.765.4609309640
AHA-37835194.00195.001.001.6924.25590429042300
AHA-37837195.00196.001.002.1021.8442041628600
AHA-37839196.00197.001.001.9916.5317019941100
AHA-37841197.00198.001.001.228.82080314000
AHA-37842198.00199.001.000.858.3401023612650
AHA-37843199.00199.900.901.5827.66090369026600
AHA-37844199.90200.901.002.5714.6330022542400
AHA-37845200.90202.001.101.1314.85120101510700
AHA-37846202.00203.001.0013.00116792016037700
AHA-37848203.00204.001.000.5611.9357010417250
AHA-37849204.00205.001.000.303.4694923300
AHA-37850205.00205.800.802.3144.414305616100

Photos accompanying this announcement are available at:

https://www.globenewswire.com/NewsRoom/AttachmentNg/2e1806ae-5656-4a80-b0db-6dc532743dbf

https://www.globenewswire.com/NewsRoom/AttachmentNg/510920e3-67fe-40c5-8299-5592f72c34c4

https://www.globenewswire.com/NewsRoom/AttachmentNg/200c6b64-13d6-4450-aca5-1cf8e9c5e69b

https://www.globenewswire.com/NewsRoom/AttachmentNg/07129da3-4d6d-4ccc-8c9f-76d7ba8716fa


Figure 1 Figure 2 Figure 3 Figure 4